Evaporation Equipment Rising Film Evaporator Vertical Shell and Tube Heat Exchanger

Evaporation equipment Rising Film Evaporator Vertical Shell And Tube Heat Exchanger  Product DescriptionRising film evaporators are suitable for dilute solutions with low concentration and heat-sensitive materials.The solution is preheated to the boiling point, added from the bottom of the heating chamber, and strongly vaporized in the heating tube. The generated vapor drives the liquid to rise in the form of a film along the pipe wall. The liquid film continues to evaporate as it rises. The solution can reach the required concentration through the heating tube.ApplicationRising film evaporators are mainly used for concentration, distillation and recovery of organic solvents in bioengineering, pharmaceuticals, beverages, petroleum, fine chemicals, water treatment and other industries.Structure IntroductionThe rising film evaporator is composed of buffer tank, preheater, heater, separation chamber, gas-liquid separator, condenser, cooler and receiving tank.E101-Plate Preheater                  E102-HeaterE103-Plate Condenser                  E104-Snake CoolerV101-Buffer Tank                    V102-Coolant collection tankS101-Separation Chamber               S102-Gas-liquid SeparatorP101-Charging Pump                    P102-Concentrate Discharge PumpP103-Coolant Discharge Pump                     P104-Water Ring Vacuum PumpWorking PrincipleRising film evaporator adopts decompression concentration technology, which greatly reduces energy consumption and operating cost. The raw material is preheated to the boiling point or close to the boiling point, and is introduced into the tube from the bottom of the heating chamber. The high-speed rising secondary steam drives the solution to flow in the form of a film along the wall and evaporates; the required concentration is reached at the top of the heating chamber, and the solution is discharged from the bottom of the separator.The vapor liquid separator separates the liquid carried by the steam, and the unvaporized liquid returns to the concentrator. The condenser liquefies the gas to achieve solvent recovery. The cooler cools the liquefied solvent to achieve full solvent recovery. The receiving tank collects and stores the liquefied solvent. Product FeaturesLarge amount of evaporationEfficient and stableSuitable for heat sensitive materials lower heightHigh-efficiency plate heat exchanger is used for preheating.Unique design, using steam coolant to heat the preheater.Vertical separation chamber reduces the height of the equipment.The large window of the separation chamber can detect the liquid level status at any time.Coolant recovery adopts high-efficiency plate heat exchanger.Product ParametersModelRFE-500Evaporation Capacity(L/MIN)500Evaporation Temperature(ºC)55 ~ 75Vacuum Degree(Mpa)-0.06 ~ -0.095Buffer Tank(L)500Preheating Area(M2)2Heating Area(M2)20Condensing AreaM2)20Cooling Area(M2)1Coolant Collection Tank(L)300Charge Pump(T/H)2Concentrate Discharge Pump(T/H)2Coolant Discharge Pump(T/H)1Water Ring Vacuum Pump(L/MIN)833Material304  CertificationsPackaging & Shipping/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1