Pig Carcass Scraper Automatic Conveyor Slaughtering Machine 1.1kw Custom-Made

Pig carcass scraper automatic conveyor slaughtering machine 1.1kw custom-madeThe machine is used in pig shaving and conveying equipment. It is developed on the basis of absorbing foreign advanced technology. It is an advanced equipment in China, suitable for large and medium slaughterhouses. This machine conveys wide surface and can transport pig body of different size. The conveying process is controlled by mechanical and chain transmission system. Main use and characteristics:1) the whole machine adopts mechanical transmission, no pollution to pig body.2) stable operation and long service life.3) continuous production and high efficiency.4) simple operation and less easily damaged parts. Installation and commissioning1) the machine is tested, debugged and operated properly before it leaves the factory. However, after leaving the factory, due to transportation, loading and unloading and other factors may cause maladjustment or malfunction, so we must carry out a comprehensive inspection of the whole machine before installation, to ensure that the components are in good condition after installation;2) arrange the carcass scraper according to the process plan and the concrete situation of workshop, and determine the installation height and the auxiliary equipment before and after installation;3) checking whether the fit of roller chain with drive wheel and slave wheel is compact or not, if there is any problem, adjust the tension properly to make the whole fit tight;4) add lubricating oil to each rotation position;5) use point test after installation, if no blocking phenomenon is found, the motor can be started without load, and can be put into use after normal operation. Inspection, maintenance, maintenance and troubleshooting methods:1) lubricate the rotating parts frequently; such as chains, bearings, etc., should be replaced on a weekly basis.2) after each shutdown, the equipment should be cleaned and cleaned to keep the inside and outside of the body clean;3) at the same time, since the machine is in the state of vibration, fasteners should be tightened regularly to reduce loosening and replace fasteners that break and slip, especially the bolts with square tubes connected to roller chains, Regular inspection on time, so that the conveyor plate and roller chain in a safe state of fastening;4) after using for a period of time, the oversized clearance and damaged bearing should be replaced in time to avoid affecting the normal operation of machinery;5) when adjusting or installing the machine, it is necessary to ensure that the front and rear drive and the center of the motor wheel are in the same horizontal line. If the deviation occurs, the running machine will cause serious damage;6) Accessories and special tools shall be shelved on special cabinet shelves, kept clean to prevent abrasions.7) Power equipment shall not be operated with any malfunction, and first any failure must be eliminated 8) the equipment is in daily maintenance, No disassembly of parts, stop immediately if abnormal. If the above method can not solve the problem, please do not blindly remove, lest the scope of the fault is expanded, please contact the manufacturer after-sales department to repair.   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1