Factory Grade M Rubber Conveyor Belt in 24 MPa Good Quality

Factory Grade M Rubber Conveyor belt In 24 Mpa Good QualityOur rubber Conveyor Belt is made with E.P. fabric plies. The top and bottom are provided with abrasion resistant rubber covers to DIN 22102 and BS 409 as standard.EP Polyester/Polyamide (Nylon) fabric is constructed with synthetic woven fabric, utilising a Polyester fibre for warp and Polyamide fibre for weft.Polyester conveyor belts,also called EP conveyor belts,whose tension resistant body is canvas woven by polyester in warp and nylon-66 in weft.The belts have the characteristics of low elongation in warp and good troughability in weft,good water resistance,good wet strength,no mould,suitable for medium,long-distance and heavy-load transportation of materials.Because of the high initial modulus of polyester,the belts can choose a relative low safety factor.We could offer belt with cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.  Fabric typeFabricPly thickness (mm/P)Single fabric strength(mm)Cover thickness (mm)WidthLengthspecsUpperLowermmmPolyester(EP)EP-1000.81002.0~80~4.5400-260020-1000EP-1250.85125EP-1500.9150EP-1600.9160EP-2001.05200EP-2501.25250EP-3001.35300EP-3501.5350EP-4001.8400EP-5002500 Conveyor belt technical data sheetAdhesion and elongation of the belt:BeltAdhesive strengthElongationcarcassBetween pliesN/mm Between rubber and carcassLongitudinal elongation at breakLongitudinal elongation at reference load N/mmRubber thicknessRubber thickness%>=%=4.50>=3.2>=3.5104Cover properties of the belts:Cover gradeTensile strengthElongationAbrasionChange Rate of tensile strength and elongation after aging>=>=