Sunmu Industry 40 - 400mm Sidewall Height Chevron Rubber Conveyor Belt China Manufacturers Nylon Canvas Chevron Rubber Conveyor Belt

SUNMU INDUSTRY 40 - 400mm Sidewall Height Chevron Rubber Conveyor Belt China Manufacturers Nylon Canvas Chevron Rubber Conveyor BeltProduct DescriptionCHEVRON CONVEYOR BELTSConveyor belts with a smooth carrying surface are useful for conveying packed and unpacked material up to the angle of inclination of 22° as an upper limit.Chevron belts are the right belts to meet your requirements when higher angles of inclination are required. For this purpose, our experts have developed high-performance and high-quality Chevron and High-Chevron conveyor belts. They are noted for long service life and flexibility due to homogeneous Chevron profiles, which are vulcanized together with a base belt.Chevron conveyor belts are suitable for:quarries, sandpitscement works, lime worksfarming: conveying of beets, grains, potatoes, fertilizers, wooden chipscoal and coke transportsugar refineriessalt minesmobile crushers and screensroad milling machinesCHEVRON CONVEYOR BELTChevron conveyor belts are used on slope angles up to approx. 30 for slightly rolling materials such as gravel and coal and up to approx. 40° for sticky materials such as wet sand and earth. Patterned conveyor belts are also highly effective belts for conveying packages such as sacks and bales.CHEVRON CONVEYOR BELT STRUCTURESidewall conveyor belts are composed of three parts: base belts, and sidewall cleats. Sidewall effectively protects bulk materials from sideslip and scatter.it is designed by most experienced engineers to corrugate shape and can withstand high stress and repeated flexingCleats are the main part to carry materials in a high capacity and steep angle, which is T or TC type usually.These two parts are connected with a base belt by second hot vulcanizing, which creates a super-strength bond between the sidewall, cleats, and base belt.TENSILE STRENGTH TEST OF SIDEWALL CONVEYOR BELTSUNMU INDUSTRY conveyor belts will be tested for tensile strength, abrasion resistance, and adhesion before leaving the factory to determine whether the conveyor belt meets customer requirements.CONVEYOR BELT SHIPPING AND PACKAGING- SUNMU INDUSTRY will provide packaging advice based on the type of conveyor belt you ordered.SUNMU INDUSTRYconveyor belt provides three packaging methods: round roll, glasses roll & oval roll.- Conveyor belt outsourcing pp tarpaulin, color can be customized, and also provide pallet (wood/metal) and iron frame options. Product ParametersDIN-Y -- 1000mm --- EP400/3 --- 4+2 ---- 9mm ----300m ---- Moulded edgeDIN-Y: Cover rubber grade1000mm: Belt widthEP400/3: Tensile strength4+2: Top+Bottom thickness9mm: Belt thickness300m: Belt lengthMoulded edge: Belt edge type Cover Rubber Grade8MPA, 10MPA, 12MPA, 15MPA18MPA, 20MPA, 24MPA, 26MPADIN-X, Y, WRMA-1, RMA-2N17,M24Belt Width(Mm)500,600.650,700,800,1000,12001400,1500,1800,2000,2200,250018",20",24",30",36",40",42"48",60"72",78",86",94"Tensile StrengthEP315/3,EP400/3,EP500/3,EP600/3EP400/4,EP500/4,EP600/4EP500/5,EP1000/5,EP1250/5EP600/6,EP1200/6330PIW, 440PIWTop+Bottom Thickness3+1.5,4+2,4+1.5,4+3,5+1.5,3/16"+1/16",1/4"+1/16"Belt Thickness3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,12mm,15mm,20mm,25mmBelt Length10m,20m,50m,100m,200m,250m,300m,500mBelt Edge TypeMoulded(Sealed) Edge Or Cut Edge  Detailed PhotosCompany Profile FAQPRECAUTIONS FOR THE USE OF RUBBER CONVEYOR BELTS1. Avoid the idler being covered by the material, causing the rotation to be ineffective, prevent the leakage of the material from being stuck between the roller and conveyor belt, and pay attention to the lubrication of the moving part of the conveyor belt, but do not contaminate the rubber conveyor belt;2. Prevent rubber conveyor belt load from starting;3. If the rubber conveyor belt deviates, measures should be taken to correct it in time;4. When the rubber conveyor belt is found to be damaged locally, repair materials in time to avoid expansion;5. Prevent the rubber conveyor belt from being blocked by the frame, pillars, or block materials, and prevent it from being broken and torn.RUBBER CONVEYOR BELT DAMAGE AND CAUSES1. Local wear (skin damage)Fabric-core rubber conveyor belts and steel-core rubber conveyor belts are prone to such damage. The main reason is that the transfer place, the material guide trough, the failed idler, and other parts are easily stuck with large material blocks. Once the rubber conveyor belt is running, it will definitely cause excessive wear of the rubber conveyor belt.2. Partial fragmentation (penetrating injury)Fabric core rubber conveyor belts and steel core rubber conveyor belts have such damage. When the rubber conveyor belt is transporting materials, there are often larger stones and sharp material blocks mixed in. These material blocks break through the rubber conveyor belt with a large impact force at the transition because of insufficient buffering, forming holes. lf the material is mixed with sharp objects, such as iron crowbars, it is very easy to scratch the rubber conveyor belt, resulting in large-ar