Hospital/School/Hotel/Kitchen/Washing/Bathroom Efficient Customized Domestic Sewage Treatment Plant

Product DescriptionThe integrated sewage treatment plant can effectively remove BOD5, COD and NH3-N. The device is characterized by the stable performance, effective treatment, economical investment, automatic operation, convenience of maintenance and small occupying space. There is no need for construction, neither heating and heat preservation.The surface can be used as green land or square land.It also can be placed on ground based on client's requirement.It is widely used in treating the sewage in senior hotels, village districts and residential districts, industrials, resorts etc. The sewage water after treatment would meet the national emission standards or used to irrigation.Working Principle Our Advantages1. The water quality of the effluent from the equipment is excellent, which can generally meet the water quality requirements for direct discharge or reuse of reclaimed water;2. The equipment has a wide range of applications and has good adaptability to different sewage;3. The equipment has a high degree of integration and is easy to manage;4. There are fewer civil works and other supporting facilities after the equipment is adopted, which reduces the investment and can shorten the construction period;5. The equipment has a high degree of integration, is relatively mature, and is easy to install and debug;6. It can be made of carbon steel, stainless steel, FRP and other materials, with good anti-corrosion performance and a service life of up to 30 years;7. Generally, it can be buried underground, does not occupy the surface area, and the operation has no effect on the surrounding;8. The equipment is more flexible and has a high degree of customization. The internal processing unit and external dimensions can be specially arranged according to customer needs;9. The processing technology adopted by the equipment is relatively advanced, with large biomass and high volume load;10. High biological activity, less excess sludge, generally no sludge bulking and other problems;11. The aeration method can use the diaphragm type microporous aeration or jet aeration, etc., the effect is better;12. The fan can be a low-noise fan such as a rotary fan, and the equipment noise is small. APPLICATIONS                            Hospital                                                     Hotel                                                    Station                           Sewage                                                   Roral                                                       Mining                        Chemical                                                  Canteenl                                                      SlaughterOur ProjectProduct ParametersModelWSZ1WSZ2WSZ3WSZ5WSZ7WSZ10WSZ15WSZ20WSZ25WSZ30WSZ40WSZ50Capacity1235710152025304050(m3/h)Number111111222345Fanair volume0.310.590.671.021.722.54.114.112.5x22.5x24.11x24.11x3wind pressure500050005000500050005000500050005000500050005000power0.550.751.51.52.23.75.55.53.7x23.7x25.5x25.5x3The water pumptraffic1235710152025304050lift 888888888888power0.550.550.550.750.750.750.751.51.51.53.75.5Area61014192839587593113143168        Installation Instructions1. Prepare the foundation according to the installation drawing and the foundation drawing. The size of the installation plan shall prevail. Make a concrete floor. The foundation requires an average pressure of 5t/m2. For equipment, if the equipment is installed below the floor, the relative elevation of the foundation from the floor shall be subject to the size of the drawing, and the surrounding excavation width and length must be more than 500mm away from the edge of the foundation for pipeline installation.2. Pipeline installation and connection should be considered when the equipment is in place. When the equipment is in place, the self-weight of the equipment must be in accordance with the manual and the tonnage of the crane. The installation sequence should be in place according to the on-site comparison diagram. must be correct.3. According to the installation drawing, connect the pipes. After the equipment is in place, the connecting pipes should be fastened with rubber pads so that the connection does not leak.4. After the installation is completed, the equipment and the foundation must be connected and fixed. It is absolutely guaranteed that the equipment will not flow and float. At the same time, sewage must be injected into the equipment (when there is no sewage, use other water sources or tap water instead) The fullness must reach more than 70% to prevent the equipment Float up, and check the pipes for leaks at the same time. The pipelines in the water test must not leak, and the equipment will not rise from the ground water, which will cause the equipment to be dislocated and tilted.5. After the equipment is installed and there is no problem, you can fill the gap around the equipment with soil and tamp it, and level the ground. When filling the soil, pay attention to: (1) The equip