EPDM Waste Water Treatment Tubular Fine Bubble Diffusers

Product Description The wastewater treatment of activated sludge and contact aeration process and aquarium will all need high Oxygen transfer rate or Oxygen transfer efficiency, and low pressure loss by the membrane. The reinforced EPDM can continuously create fine bubble from slots on the EPDM membrane of disc type or tube type diffuser.The expected duty life may be over five years without tearing or bursting. There are other material selections of self-sink silicon rubber membrane, ceramic diffuser, air stone, and coil looking diffuser. There are also course bubble air diffuser for application of liquid mixture. The diffuser can be used for roots blower, ring blower and linear air pump. The diffuser also has advantage of much energy reduction.Our Fine Bubble Tube Diffuser can be connected on one side or in pairs to different rectangular and round tubes (ABS material) with the appropriate adapter.The support tubes(ABS or PVC material)can be reused when membranes are replaced. The units offer maximum performance at minimum cost and require minimum maintenance.Product Parameters Technology Parameter Length 500mmLength 750mmLength 1000mmService Area0.5-1.5 m20.75-2.25 m21-3 m2Bubble Size1-2mm1-2mm1-2mmPerforation Size1mm1mm1mmPerforation Quantity170001700017000Membrane Thickness1.7-2mm1.7-2mm1.7-2mmTemperature0-80ºC0-80ºC0-80ºCResistance Loss1900-3000 pa1900-3000 pa1900-3000 paOxygen Utilization27%-38%27%-38%27%-38%Air Flow1.5-5 m³/h2.25-7.5m³/h3-10 m³/hMaterialEPDM/SiliconeEPDM/SiliconeEPDM/SiliconeDiameterφ63/φ65/φ90φ63/φ65/φ90φ63/φ65/φ90We offer OEM manufacturing with high reliability and stability of performance, efficient and effective satisfaction of your clients. Let our diffuser be the best choice of your solution.FeaturesHigh oxygen transfer efficiency.High resistance to clogging.High resistance to corrosion.Wide air flow range.Low pressure loss.Low energy cost.Easy installation.Uniform fine bubble.Back flow prevention.Self cleaning operation.Intermittent operation capability.Slide-off prevention designed.Cost saving.Membrane with EPDM or Silicone Rubber compound.Air inlet modled injection of PVC or ABS.Supporting frame with PVC or ABS pipe.Clamp with stainless steel.Non tearing & non clogging I-shapped slits.  ApplicationsMunicipal wastewater treatment.Industrial wastewater treatment.Clean water treatment.Sludge stabilization.Wastewater ozone diffusion.Aeration of fish ponds.Aeration of streams and lakes.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1