RJ45 Connectors with Magnetics and LED Light

Modular Jack with Filter and -1.1dB Insertion Loss Electrical specifications at 25º C Turn ratio (+/-3%): TX and RX = 1CT: 1CT OCL (100kHz/0.1V at 8mA): 350uh minimum Ll (100kHz/0.1V): 0.3uh maximum CWW (100kHz/0.1V): 30pf maximum DCR (j1 to j2 and j3 to j6): 1.2 ohms maximum Insertion loss: -1.1dB (0.3 to 100MHz) Return loss: -18dB (1 to 30MHz), -12dB (30 to 80MHz) minimum Cross talk: -35dB (1~100MHz) CMR: -35dB (1~100MHz) Hi-pot test: 1, 500V RMS/0.5mA/2sec Operating temperature: 0 to +70º C Ordering information: MJKf4511-PA88GXS-l1 MJKF: Modular jack with filter 4511: Series number PA: PCB type, right angle 88: Number of contact, 8P8C GX: Contact plating option GF: Gold flash GFT: Gold flash on contact, tin plated on solder tail G15T: 15u-inch gold on contact, tin plated on solder tail G30T: 30u-inch gold on contact, tin plated on solder tail G50T: 50u-inch gold on contact, tin plated on solder tail S: Shielded without panel grounding tab LED 1: Green LED 2: Yellow Company ProfileANTENK Electronics Co., Ltd was established in 2004. We specialize in producing precise Board to Board,Automotive Connector, Terminal Block Series ,Battery Connector,Din41612 Connector,Round hole row needle, round hole row mother, IC Socket,Battery Holders Series, Male Pin Headers Series,Female Pin Headers Series, Modular Jack RJ45 Series ,D-Subminiature Connectors Series,Box Header Connector, IDC Socket Connector ,SCSI Connectors Series, Power Signal Connector, Wire to Board Connector, Modular Jack, Terminal Block, Wire Harnesses,Cable Assemblies, I/O Connector. Through 15 years of development, we have grown into a leading manufacturer in Asia. We have passed IATF16949:2016, ISO9001:2008 and ISO1400 Certification as well. ApplicationAntenk's connector products are widely used in LCD, digital camera, industrial control, mobile storage, household appliances, network communication equipment, motor, automobile and all kinds of precision instruments etc.CertificationsFAQQ1.Are you a manufacturer or trading company?A: We are a professional manufacturer for all kinds of connetors is in Shenzhenwe have an excellent R&D team with over 10 year-experience.Q2.What's the lead time after place order?A: Normally we will deliver your order 10-20 working days after place order.Q3.What is your sample policy?A: Free Sample is acceptable (1-20pcs), and customers need to pay the freight cost.Q4. Do you also test all your products before deliverying?A: Yes,we usually test them 100% before deliverying.Q5: What is your payment and shipment?A: Payment: TT,LC, Western Union,PayPal etc.T/T 30% as deposit and the balance before delivery.Shipment: We usually use express delivery like DHL, UPS, TNT and FEDEX etc.Shipping  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1