Automatic Door Photocell

Basic Info.Model NO.PT01TypeReflective Panels Type Photoelectric SensorOutput Signal TypeDigital TypeProduction ProcessIntegrationMaterialABSFeatureLow Temperature ResistantIP RatingIP55CertificationCECustomizedCustomizedWeight230gTrademarkVEZETransport PackageStandard Exporting PackagingSpecificationCEOriginNingbo, Zhejiang, ChinaHS Code8536500090Product Description1.Panel Instruction and Use Description1. Far detection distance2. Near detection distance3. Double-beam optical access4. Single-beam optical access5. Emission contact 2 and Receive contact 26. Power indicator7. Input power contact, Emission contact 1&Receive contact18. N.O. and N.C. Contact selection.2. The Overall Characteristics:**Adopt microcomputer control technology, high integration with high stability.**International optical lens design with good focus quality, controlled angle is rational, easy to be  installed.**Far transmit distance with strong, anti-interference ability.**Adopting receiving filter, decoding, amplification system of German technology. Effective solution to anti-interference of natural daylight.**Emission electric eye adopts low-power consumption design with far transmit.**Emission contact and receive contact output separately with shielding line.**When the signal light be blocked, N.O or N.C contact can be flexibly chosen.**With 12-36V AC-DC power input.3.Specific Considerations**Drilling the mounting holes of 13mm for electric eye installations.**Select the single-beam optical access: installation height within 60cm.  Select the double-beam optical access: Installation height of one group within 30cm while the other be installed    within 90cm.**Emission contact and receive contact should be connected on 8pin terminal in case of single sensor beam be selected.**Adjust the installation place into vertical and horizontal position. And sundries should not be put around to avoid error action.**Installation height of receiver should be within 20cm from the background.**Don't place into moisture or direct sunshine.5. Technic Parameters:Supply power: AC/DC 12-36VStatic current: 25mAAction current: 40mAThe maximum transmit distance: 10mN.O or N.C contact: Done by N.O/N.C contact selectionBeam: Single beam or double beamWorking environment temperature: -42ºC~45ºCWorking environment humidity: 10~90%RHAppearance dimensions( controller ): 123(L)×50(W)×32(H)mmAppearance dimensions( magic eye head ): 19(L)×13(D)mmPictures:SpecificationItemPT01Warranty2 yearsAfter-sale ServiceOnline technical support, OtherProject Solution Capability3D model design, OthersApplicationHospital,office, workshop,etc.Design StyleModernPlace of OriginChina ZhejiangBrand NameVEZEProduct Name   Autodoor safety beam sensor single beam or double beamPower supplyAC/DC 12-36VColor  GreyUsageElectric Door SystemMax launch distance10mMaterialABSoutput signal:NO/NCWorking temperature  -42ºC~45ºCAdvantageStrong anti-interferenceAutomatic door safety beam sensor is a kind of safety access control device, designed to prevent the occurrence of safety accidents or injuries in the operation of automatic door. It is usually installed on the door frame of an automatic door. When beam sensors detect a person or object in the passage of the door, the door will automatically open so that people or objects can enter safely. In addition, the safety beam sensor can detect if someone or something outside the door is approaching and if the door is opening in the correct position.Factory: