Ets 8848 Lte 4G Fixed Wireless Terminal

General Description4G LTE FWT ETS-8848 is a 4G Lte to Analog Converter, the device can produce a FXS line to allow a regular phone to be connected and used just like a local land line(PSTN) except your calls will go out from the 4G network. This device can both receive and make calls. The main applications are: Connecting the RJ-11 FXS line to an ordinary telephone set for voice call; to connect PBX for call extensions; to connect billing systems for public phone use; to connect VoIP FXO gateway to realize VoIP call termination; to connect alarm system for security purpose, etc. It is a 4G LTE Fixed Wireless Terminal that produces an analog FXS phone line . Module employed:  Quectel 4G LTE Standard EC2x(EC25,EC21,EC20 R2.0 and EC20 R2.1)/EG21-G/EC200T etc.for different countries and networks Features:It supports VoLTE function.It is a 1 port 4G LTE fixed wireless terminal which has 2 RJ-11 outputs for extensions;It can connect with ordinary telephone set, PBX , VOIP Gateway, Billing meter etc.Employ industrial module Quectel EC2X series to makeSimple to install and easy to maintain Steady module and reliable design ensures good performanceProvides optimized circuit directly connecting the exchange device for extensions Compatible to most telephones, PBX device. Strong signals with high gain antenna Attractive plastic casingSIM card supported (1.8V, 3V) Caller ID displaySupport DTMF/FSKProvides reversal polarity signal for metering No noise and clear voiceSuitable for wide voltage range and low power consumptionSuitable for all kinds of weather and environmentLocking PIN / network (optional)Air interface standard: Quectel 4G LTE standard module EC2X is a wireless module which is designed for the global market.it can be designed in many kinds of applications which can work on 4G LTE network. Quectel 4G LTE module EC2X support the Bands as the following:EC25-EUX for example :  LTE FDD: B1/B3/B7/B8/B20/B28A LTE TDD: B38/B40/B41 WCDMA: B1/B8 GSM/EDGE: B3/B8  --For other modules,please refer Quectel website http://cnetross.en.made-in-china.com to choose the correct module.  Phone interface: supply RJ-11 Phone Interface Hanging voltage: 45V Picking off voltage: 30mA / 41mA Dialing tone Frequency: 450Hz Antenna interface: Antenna amplifying>2.5db Sensitivity: