SMA Female Right Angle 4 Feet Bulkhead Mount Connector Solder Attachment Thru Hole for PCB

Product Parameters ELECTRICAL DATA Impedance                                                                  50ΩFrequency range (for connector interface)12.4GHzDielectric withstanding voltage (at sea level)≥750-1500V,50Hz  (depending on cable)Working voltage (at sea level)≥250-500V,50Hz (sea level) / ≥65-125V,50Hz  (Height 21000M)Insulation resistance≥ 5000 mΩContact resistanceInner conductor: ≤3mΩOuter conductor: ≤2.5mΩRF leakage(2-3GHZ)Flexible: ≥60dBSemi-rigid cable: ≥100dBMECHANICAL DATA Coupling nut torque0.8Nm--1.1Nm / 7.1 in.lbs--9.7 in.lbsCoupling nut retention force≥270N / 60.7 lbsContact captivation axial ≥27N / 6.1 lbsDurability (matings)≤500ENVIRONMENTAL DATA Temperature range-65°C  to +165°C MATERIAL DATA Bodies, outer contactsBeryllium copper--Au platingStainless steel--PassivationBrass--Au plated / ternary alloy plating Phosphor bronze --Au platingPin contactsBrass/Beryllium copper--Au platingSocket contactsBeryllium copper / Phosphor bronze--Au platingCrimp ferrulesBrass--Au platingInsulatorPTFEGasketsSilicone rubber Product Features Can terminate to coax, PCB (printed circuit board) or terminal;Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance;Body can be straight, radius right angle or right angle;Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less;Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact);Body is brass or stainless steel.  Related Products     RF connectors are used to connect cables to other devices and are specifically designed to maintain the shielding on the cable. High-quality connectors offer reliable, long-lasting connections, Low Pim Connectors.    There are two distinct connector styles; male and female. Male connectors have a protruding metal pin in the center, whereas female connectors have a receptacle to receive that pin. Depending on the connector size and frequency, some may be sexless and mounted flush instead of mating.    Within digital, video, audio, Network,RF Coaxial system, and microwave industries, there are several varieties of coaxial cable connector types. Each offers unique benefits based on the end use or application. Below are some of the most common coaxial connector types, along with their distinguishing characteristics and intended applications,DIN 7-16, N, 4.3-10, BNC, SMA, NEX10, MCX, TNC, QMA, IPEX/U.FL etc.    RF Cable Assemblies high-frequency cables are suitable for low-loss and distortion-free transmission of high-frequency signals. The fastest transmission of data takes place directly which is why assembled coaxial cables from ROHO ensure powerful and uncomplicated data communication. The shielded design makes ROHO assembled coaxial cables far less sensitive to external interferences such as damage or electromagnetic fields. Wired solutions are suitable for highly complex infrastructures where flexibility, security and performance count, such as measurement lines in test laboratories. Furthermore, they are used in electrical and radio technology, communication and data technology - all areas where high demands on transmission quality or shielding are made.    The product range incorporates all commonly available RF cable assemblies and the development of customized solutions from DC up to 50 GHz.    ROHO offers RF adapters design as well as T and Cross RF adapters. RF adapters include some connectors interface types such as SMA,TNC, N, BNC, SMP, 4.3-10, DIN 7-16, 2.92mm, 3.5mm, NEX10, QMA ,MCX, UHF and F.    RF adapters are available in male, female, plug, jack, receptacle or sexless gender, in 50 Ohm, 75 Ohm, 78 Ohm or 95 Ohm impedance and in standard polarity or reverse polarity. RF adapters are available in quick disconnect (QD), push-on or standard interface as well as straight, 45 degrees right, radius right angle or right angle versions. ROHO offers RF adapters in standard and high performance with brass and stainless steel body as well as some hermetic, bulkhead or 4 hole panel configurations.    An antenna is an array of conductors (elements), electrically connected to the receiver or transmitter. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction (directional, or high-gain, or "beam" antennas). An antenna may include components not connected to the transmitter, parabolic reflectors, horns, or parasitic elements, which serve to direct the radio waves into a beam or other desired radiation pattern. Strong directivity and good efficiency when transmitting are hard to achieve with antennas with dimensions that are much smaller than a half wavelength.    RF attenuators act as resistors and are used to reduce the level of a signal within radio frequency applications and RF circ