Compact Electrospinning Equipment Used for Electrospinning Nanofilament Fibers

Compact electrospinning equipment used for electrospinning nanofilament fibersNano Fiber Electrospinning Unit Introduction:CYKY's (CY-NFES-040B model) Electro-spinning equipment is a compact version for Nano fiber Electro spinning.A unique support structure made of steel pipes is provided along with the equipment which when screwed and fixed together can be used as a sturdy support for the Nano fiber electrospinning unit.Nano Fiber Electrospinning Unit Key Features:Cabin Heating:  Upto 45°C using 1000 watt coil heaterThe chamber is provided with Residual Charge Discharge Stick which is used for static removal.Safety switch provided to switch off H.V. Power supply when door is opened.LED cabin lighting and back light to view Needle tip and electro spin process.Exhaust fan is provided for solvent vaporization. It is also used for cooling down the equipment after spin process.Emergency stop is provided on the control panel to stop the equipment where there is any emergency.Coaxial spinneret: Our Nano fiber electrospinning unit equips Coaxial spinneret which helps to produce Hollow nanofibers and Core / Sheath nanofibers. This technology can also be used to combine different characteristics of each polymer into one fiber.Graduation scale provided on the granite surface in X & Y direction which helps the end-user to achieve repetitive results by marketing the positions of syringe pump and target.User friendly software enables PC interfacing that helps the regulation and control of various features like Rotating mandrel speed, Spin Duration, Syringe pump flow rate, XY target movement etc.Rotating Mandrel targets of varying diameters, Stationary target and Reciprocating XY target provided with the system.System hood has features like Exhaust fan, halogen lighting and transparent door for monitoring electrospinning process.Built-in Arc Protection CircuitNano Fiber Electrospinning Unit Specifications:ItemDetailSpecificationsHigh Voltage Power SupplyCYKY  CY-NFES-040 comes with HMPSKV30 model high voltage power supply. It has 0 - 30kV output voltage range with a maximum current capacity of 0.5mA. Output voltage and current can be set using front panel knobs and readout from the digital panel meters.1.0 - 30kV Single Output, 0.5mA max Current2.Digital Voltmeter and Current meter3.Static Removal Device - Shorting Stick4. Constant current / Constant Voltage mode of operation5.Built-in ARC Circuit ProtectionIndependently Controlled Dual Channel Syringe PumpCYKY'  S CY-SPLF4 model syringe pump provides independent control of two dual channel syringe pumps. The speed and flow rate can be changed on both to achieve custom fabrications of fibers.The Syringe pump also can be moved to and fro in X axis. The maximum travel distance is 200mm. The movement is controlled via PC.It can operate with standard off-the-shelf syringes made of plastic, glass or stainless steel. The microprocessor based control circuit can render a flow rate of 0.4 µl/hr to 650 ml/hr (with 5ml Syringe). The syringe diameter, spin duration or the target volume can be set by the user through the ElectroSpinner software interface.1.To dispense from standard disposable or glass syringes from 2.5 to 60ml2. Syringe holder made of insulating material to work under high voltage conditions3.Motor control through microcontroller to control and indicate flow rate4.Four syringe dispensing system5.PC based control with documentation of parameters like syringe diameter, flow rate, spray duration etc.6.Manual height adjustment platform to vary the pump height according to the target height.Rotating MandrelRotating mandrels which comes with the electrospinning unit can be used as a target to get an aligned continuous mesh of nanofiber. It has a speed range of 300rpm to 4000rpm suitable for electrospinning. Grounding of the mandrel to the HV power supply is attained through a carbon brush contact. The rotating mandrel has a speed stability of +/- 1%. CYKY's  CY-RM-01 is a high speed rotating mandrel assembly which works with CYKY CY-MN series mandrels of 2mm to 100mm diameter and is of 200mm length. No. of mandrels supplied are 100mm, 75mm, 50mm, 25mm, 15mm, 12mm, 6mm, 4mm, 2mm.1.Stainless steel drums of different sizes2.Rotational Speed : 300 - 4000 rpm3.Grounding facility : Available4.Actuator:Microprocessor controlled BLDCmotor with hall sensor feedback5.Speed stability : +/- 1%6.PC based control with documentation of speed and duration Y Plate Collector & Stationary TargetThis collector can be used as Stationary target or as Y plate collector. The stationary target which acts as a collector of electro spun nanofibers, is made of stainless steel plate such that it can be held vertically on a table top. It also has connector for grounding.Using a stationary target alone cannot attain a uniform density of fibers, as most of the fiber is collected around the point orthogonal to the syringe needle. Combined with X movement provided on the syringe pump, the Y translation st