Fiber Optic Joint Enclosure 12 24 48 96 144 Cores Fiber Optical Splice Closure

Product Description2 In/ 2 Out 24-144 Core Fiber Optic Enclosure, Horizontal Optic Joint Box, Junction BoxProduct description:   This Fiber Optic Enclosure is able to hold up to 24-144 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cableconnection in one solid protection box. The optical distribution box is a solution that facilitates the installation of opticaltermination in branch networks for FTTH environments.     Main Fetures:1) User familiar industry interface, using high impact plastic PP2) Can accommodate 6x24 cable tray3) The high strength plastic, anti-ultraviolet radiation and ultraviolet radiation resistant, resistant to rain4) Up to 144 FTTH drops ,2 inlet ports, 2 outlet ports5) Outdoor used6) Housing provide fire resistant, waterproof, and quakeproof for splices while handing7) Slide-in-lock design, over 90 opening angle tray8) Elastic integrated seal ensure tightening fitApplication of the product:1. Sutable for bunchy fibers2. Aerial ,wall-mounting3. FTTH optical fiber distribution4.Telecom,opic fiber communications systemProduct Parameters  Product Name Horizontal Fiber optic splice closure Color Black Cores Bunchy 60cores,ribbon 96-144cores Protection class IP66/IP68 Seals Mechanical seal Material PP/ABS/PC Cable out of the tube configuration Up to four out of the tube fiber optic cable Ports diameter(mm) 16~22mm Fiber radius of curvature(mm) 30 Dielectric strength(kv) 1.5 Ambient temperature(°C) -40~+60 Atmospheric pressure(Kpa) 70~1106 Tensile strength(N) >1000 Anti-stress >2000N/ 10cm2 Stress,Time 1min Insulation Resistance >2X10MΩ/500V(DC) Compressive strength 15KV(DC)/1min. No breakdown.No flashover Housing dimensions(mm) 425*163.5*87mm(L*W*H) Splice Tray Max 6 pcs, 24 cores each Scope Pole, buried, manholes, wall Technical Specifications:* Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the models with the air hole),and then soak it in the water of normal temperature, after 15 minutes of steady observation, there is no bubble to overflow.* Insulation resistance: the insulation resistance between the metal work piece and the earth is greater than 20kMΩ.* Pressurization: there is no breakdown or flashover under 15kVdc/1min between the metal work piece and the earth.* The curvature radius of the fiber 40mm, without extra loss inside the splice tray.* It can bear the axial tensile strength no less than 1000N.* Lifetime: 25 years.* Other performances are all in accordance with the requirement of standard YD/T814-1998.. Company Profile/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1