3 Phase NEMA42 110mm Size F110byg350c Easy Servo/Open Loop Kit Step/Steping/Stepper Motor and CF31022m Driver

Basic Info.Model NO.F110BYG350C+CF31022MApplicationPrinting EquipmentSpeedVariable SpeedNumber of StatorThree-PhaseExcitation ModeHB-HybridFunctionControlNumber of Poles100TypeMagnetic-ElectricCertificationISO9001, CEBrandThankAdaptive Drive MotorStepper Motor DriverAdaptive Drive ModelCF31022mApplication FieldServo Control SystemThe Applied Voltage48VDC,36VDC,24VDCTrademarkTHANKTransport PackageCarton or Wooden Box with Foam InsideSpecification57mm*57mm*L41-112mm+ CF2045MOriginChinaHS Code8501310000Product Description3 Phase Nema42 Hybrid Step/Stepping/Stepper Motor kit Stepper motor and Stepper driverGeneral Specifications: Step Angle------------------------------------------------------------------------------------------------------------- 1.2°(full step)Step Angle Accuracy-----------------------------------------------------------------------------------±5%(full step, no load)Resistance Accuracy-----------------------------------------------------------------------------------------------------------±10%Inductance Accuracy-----------------------------------------------------------------------------------------------------------±20%Temperature Rise-------------------------------------------------------------------90ºC Max(rated current, 2 phases on)Ambient Temperature Range------------------------------------------------------------------------------------- -20ºC∽+50ºCInsulation Resistance------------------------------------------------------------------------------------ 100MΩ Min. 500VDCDielectric Strength------------------------------------------------------------------------------- 750VAC 50Hz 1mA 1 MinuteInsulation Class----------------------------------------------------------------------------------------------------- F Class(155ºC)Electrical Specifications:ModelLMotor Length(mm)HoldingTorque(N.m)Min.RatedCurrent(A)PhaseResistance(Ω)PhaseInductance(mH)RotorInertia(kg.cm²)LeadWireDetentTorque(N.cm)Max.MotorWeight(kg)F110BYG35013584.21.1710.875.833304.5F110BYG350A165124.22.3320.179.413506.1F110BYG350B206164.82.252714.283608.3F110BYG350C247225.22.1733.7319.1637010.4   Shaft:                                           Round Shaft                                                                                                             Key Shaft     Other Types of Shafts for Stepper Motor:End:                                      Aviation Scoket at the Motor End                                                            Aviation Socket at the Back Cover End     Stepper Motor Driver for Nema42CF31022MOverviewCF31022M is a 3-phase hybrid stepping motor driver based on DSP control. it is a new generation of digital stepping motor driver which combines advanced DSP control chip and 3-phase inverter driver module. It uses a similar servo control circuit, which can make the motor running smoothlly, almost no vibration and noise. When the motor is at high speed, its torque is much higher than 2-phase and 5-phase hybrid stepping motors. The product is widely used in engraving machine, medium-sized CNC machine tools, computer embroidery machine, packageing machinery and other high resolution, large and medium-sized CNC equipment.Key Features1. 110 to 220VAC supply voltage2. Suitable for 3 phase, 3 and 6 leads hybrid stepping motors, with NEMA 34 to 53. 3. Output current selectable from 1.2~7.0A4. Current reduction by 50% automatically, when motor standstill mode is enabled.5. Optical isolation signal input/output6. Positioning accuracy is up to 60000 steps/turn7. Over Voltage, Coil to Coil and coil to ground short circuit protection8. Pulse Input Frequency0~200KHz9. The phase memory function (Note:When the friver stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the driver will automatically recover the motor phase.Dimensions (mm):Packing:Hard cardboard or wooden box with foam inside. Shipping:1. Various kinds of shipping method for choosing according to order quantity and customer's destination. BY EXPRESS BY VESSEL BY RAILWAY BY AIR2. Normally the delivery time is approx15 days according to customer's choice or ship by the best way to the destination.Delivery:1.With over 17 years of manufacturing experience, any type of customizing is available.2.With perfect service system, we can provide you with first class pre and after sale service.3.We have enough storage of each type of products, with first class packaging and shipping, make sure the accurate delivery.4.Professional sales consultants give you all answers about our proucts.Certificate:FAQ:Question1: What is your service time:Answer: 24 hours online service. Email will be replied within 12 hours.Question2: What about your products' warranty?Answer: 1 year. For sea orders, the warranty is 15 months.Question3: Do you have any certificate?Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.Question4: Do you offer ODM an