Small Unipolar Stepper Motor 5V DC 32 Step 1/16 Gearing 28byg

Basic Info.Model NO.28BYG-48CertificationISO9001, CCC, Ce;RoHSBrandTECOTrademarkCasunSpecification19*35mmOriginGuangzhou, Guangdong, ChinaHS Code8501109990Product DescriptionThis is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for most purposes 1/16 is a good enough approximation) What this means is that there are really 32*16.032 steps per revolution = 513 steps! The shaft is flattened so its easy to attach stuff to it with a set-screw. A perfect first stepper motor and works well with the Motor Shield for Arduino.Do not use interleaved or micro-stepping to control this motor or it will take forever to turn. Instead use single or double stepping. The torque is fairly high but its slower than un-geared steppers - we maxed out at about 50 RPM by over-driving it a bit with 9VDC. At 5V try to stick to under 25 RPM.You must use this motor with motor driver board/ IC to get it working, ULN2803 IC works great with this motor. Check out the ULN2803 Motor Driver board in out Store. SPECIFICATIONS:Series28BYJ-48TypePermanent Magnet Gear MotorCoil TypeUnipolarVoltage - Rated5VDCCurrent Rating-Steps per Revolution4096Step Angle0.088°Accuracy-Torque - Holding (oz-in / mNm)16.66 / 117.68Size / DimensionRound - 1.100" Dia (28.00mm)Diameter - Shaft0.197" (5.00mm)Length - Shaft and Bearing0.394" (10.00mm)Mounting Hole Spacing1.378" (35.00mm)Termination StyleWire Leads with ConnectorOperating Temperature-Coil Resistance50 OhmsFeaturesFlatted Shaft. DIMENSIONS: