Rotary Overhead Electrified Porcelain Insulator Cleaning Brush

Details:Place of Origin: China                                                        Brand Name: XINCHENGProduct name: Electric cleaning brush for live working insulator/Switch bushing/Zinc oxide arrester/ valve type lightning protection porcelain/Wall bushing etc.Use: Insulator, power system cleaning and maintenanceApplication: Cleaning and maintenance of insulator, knife switch, lightning arrester, wall bushing, rod insulator, etc.Constitute: Electric mechanism, brush head, insulating operating rod, handle, Bracket (optional)Rated Voltage: 35-220KV                                                              Brush material: bristles /hard synthetic bristlesThe material operating rod: FRP tube, Super Epoxy Non-alkali Fiberglass Fabric TubeRod length: 1m, 2m, 3m or customized.                                  Customized support: OEM, ODMWorking power supply: 220V AC /380 AC                         Cleaning power: electric 0.8kW, pneumatic 4kWRotation speed of brush: 700 r/min - 1000 r/min               Operating ambient temperature: - 20 ° C~60 ° CSweeping power: electric 0.8kW/pneumatic 4 kW             Relative humidity: No more than 85%Color: Red, green, yellow or as per your requires              Package: Portable bag, International Standard PackageStandard: GB26860-20116.14.9, GB26860-2011 6.2.2Product Description:With the rapid development of production technology in the electric power industry, more and more electric power products are applied to electric power operations, which effectively reduces the work intensity of staff and ensures a safer working environment. The electric sweeping brush is one of them. The electric sweeping brush can sweep the porcelain bottle and insulator 5 meters above the ground. According to the shape of the brush head, it can also sweep the transformer, knife switch and lightning arrester. In the past, if these power facilities need to be cleaned, the workers have to work at heights. The risk factor is large, and small gaps cannot be cleared. The electric sweeping brush is made of bristle, solid and wear-resistant, It can drill into the gap of transformer and other equipment to clean dust and oil. The operating rod is made of glass fiber reinforced plastic insulation material to ensure safe operation. Because of this convenient operation mode, electric sweeping brush has been widely used in electric power operation.Live cleaning brush is used to solve the problem of heavy tools and poor effect due to anti pollution flashover tripping of power transmission and transformation equipment and the need to power off for cleaning and dedusting. The portable high-voltage live cleaning device not only solves the problem of economic loss caused by power failure due to equipment cleaning, but also reduces the labor intensity of manual cleaning, improves the working safety coefficient, and also solves the problems of large weight of general live mechanical cleaning tools, large vibration of live cleaning porcelain brush, small sweeping force, easy wear of parts, environmental restrictions, etc. The main insulating parts of the insulating live cleaning brush use resin reinforced glass fiber draw bar (tube) as the main material of the cleaning brush. The rotating bearing is designed on the insulated main shaft. The main shaft can be drawn out from the insulated pipe during maintenance to clean the insulated main shaft and the inner wall of the insulated pipe; High voltage test grounding ring set outside the insulating pipe. All parts of the cleaning brush are easy to disassemble and maintain.Material of electric cleaning brush: the brush is bristles or hard synthetic bristles, the cleaning brush rod is made of glass fiber reinforced plastic, and the connection type is used between the rods.Specification:TYPENumber of brush headsApplicable typeOperating lever length (M)DS-11WT porcelain bottle is made of porcelain pieces of various sizes.2+3DS-24Various rod type porcelain bottles for GW-4 and GW-5 knife brakes.2+3DS-32PT, CT, coupling capacitor, SW3-7 lean oil switch sleeve, zinc oxide lightning arrester and other porcelain parts.2+3DS-43Transformer bushing MKII multi oil switch bushing, wall pipe and porcelain parts on the reverse side where no one can stand.2+3DS-54Anti pollution GW4-5 knife gate and valve type lightning protection porcelain parts.2+3Remarks:1. DS-2 type and DS-5 type have the same four brush heads, the difference lies in the internal gear and power size (DS-2 type gear has 13 teeth, DS-5 type gear has 15 teeth). The conventional rod length of the cleaning brush is 2m, and the conventional rod length of the cleaning brush is 3m (the rod length can also be customized as required).2. In addition, In addition, we also have DS-8 model, which has multi-function angle adjustable cleaning brush head,Performance test of high-voltage live cleaning machine:The high-voltage live cleaning machine manufactured by our company has passed the electrical safety work procedures GB2686