Cjx9 Air Conditioning Contactor 1p, 2p, 3p, 20A, 30A, 40A

Product Description.Description: STA3-2/2 Contactors are the result of the latest advances in reliability engineering. Heat dissipation, mechanical repeatability, coil efficiency, contact material, and design have all been optimized in this series of definite purpose contactors ;They are designed for using in refrigeration, air conditioning, and electric heating systems. Power connections can be made with either screw terminals with quick connects or lug terminals with quick connects. And this series contactors are designed to be a tougher, more compact, more versatile and quieter contactor than ever before.  Definite purpose contactors unlike general purpose contactors are non-rebuildable electronic controls designed for specific application with clearly defined operating conditions.  Contact material: Silver cadmium oxide  Approximate mechanical life cycles:1000000 Fullfill following Standard:UL508, IEC60947-4-1, EN60947-4-1, GB14048-4, Mees ARI-780 and CSA StandardOperating Conditions &Installation method1,The ambient air temperature:-5ºC~+40ºC;2,The altitude of the site of installation does not exceed 2000 neters aboce sealvels;3,The relative humidity of the air in a maximum of not more than 50% at+40ºC, relative humidity, low    temperature can be high up to 90%; for example 20 degrees, take special measures due to temperature  change should occasionally produce.4, installation type: III.5, all directions shall not exceed ±50.6, The contactor screw installation.Main Technical Parameter:  Key attributes Industry-specific attributes Electricity TypeACNumber of Pole1Phase3Main Circuit Rating Voltage120/220Main Circuit Rating Current17~130 WENZHOU SANTUO ELECTRICAL CO,LTD.    is one of manufactories that specialize in manufacturing AC CONTACTOR, Thermal Relay and Circuit Breaker... and is located in Liushi.Wenzhou.China FAQQ 1. what's the payment term?   A. We accept TT,30% deposit and 70% balance agaisnt copy of BLQ 2. how's the delivery time ? A. usually it will take about 25 days for productionQ 3. tell me the standard of package?   A. Normally are cartons, but also we can pack it according to your requirement.Q 4.Would you accept to use our logo ? A.If you have good quantity,it absolute no problem to do OEM.Q5. Can i take some samples?A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.Q6. Are you original Factory?A: Yes, we have our own factory .Q7. How can you make sure the quality of the products?A: We will accord to international quality standards to inspect every item before leaving our factory.Thanks for your reading.If any product meets your need.Welcome to send us an email.We are sure your any information can be attentioned without any delay.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1