Programmable Controller Apb Series Mini Relay for Automation PLC with LCD

Basic Info.Model NO.APB-12MTDLTask Program Structure Combination Mathematical ModelNon-LinearSignal Continuous Function Automatic Control Certification CE Condition New CustomizedNon-CustomizedMaterialApbVoltageDC12V-24VOutputRelay OutputCertificate CE Warranty1yearMemory Capacity320 FbdsBaud Rate9600BPSProtectionIP20Ambient Temperature-10ºC~+55ºCTrademarkYUMOTransport PackageCartonSpecification0.4KGOriginChinaHS Code8537101190Product DescriptionProgrammable controller APB series mini relay for automation PLC with LCD  Product DescriptionDC12V-24V, 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports, 4 points NPN transistor outputQ2,Q3 can be high-speed output ports, with LCD     APB Series PLCFeatures: Main module: 12 points; Extension module: 22 points; Itis flexible for extending, and the optimal max. configuration: 7 I/Oextension modules, 1 voice module, and 1 SMS module; Program memory capacity: 320 FBDs, EEPROM; It is allowed to place a Li-ion battery to power the clock;Under the circumstance of DC12-24V, the main machine atmost has 12 voltage analog inputs 0-10V, 2 current analog inputs4-20mA and 2 analog outputs 4-20mA; High-speed operation: at most 4 high-speed inputs 10KHZ and2 high-speed outputs 10KHZ; MODBUS protocol, and can be connected to SH-300 (TextPanel); New function blocks: pulse width modulation (PWM), pulseoutput (PTO), ACC, SMS and analog calculation etc.; Technical ParametersItemAPB-12MRD(L)APB-12MTD(L)APB-12MGD(L)APB-22MRA(L)APB-24MRDLAPB-22MRD(L)APB-22MTD(L)APB-22MGD(L)APB-12MRA(L) Surge Immunity2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)Electrostatic Discharge (outer casing)±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)Ambient Temperature-10ºC~+55ºCStorage Temperature-40ºC~+70ºCAmbient Humidity5%~95%RHDegree of ProtectionIP20(Non-waterproof)InstallationFixing with M3 screws or Standard DIN rail mountingDimensions (mm)71*99*58.5(12 points);126*99*58.5(22 points);126*99*58.5(24 points)Programming LanguageFBDPoints12 points/22 points/24 points/can support 7 I/O extension modulesMemory Capacity320 FBDsFiltering Duration of Input SignalIt can be set to improve the stability of signalReal-time Clock160h,can place a Li-ion battery if it is necessaryPassword ProtectionMultiple passwords protectionHigh-speed OperationAt most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHzAnalog OperationAt most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mAPower Failure ProtectionYesSimulate MonitoringYesCommunication InterfaceTTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfacesBaud Rate9600bpsCommunication ProtocolMODBUS RTUPower SupplyRated VoltageDC12-24VDC12-24VDC12-24VAC110-220VDC12-24VPermissible RangeDC11-28VDC11-28VDC11-28VAC85V-265VDC11-28VPower Consumption3.5w--------Digital InputInput TypeNPN/PNPNPN/PNPNPN/PNPNPN/PNPNPN/PNPInput Signal 0DC0-5VDC0-5VDC0-5VAC0-70VDC0-5VInput Signal 1DC8.5-28VDC8.5-28VDC8.5-28VAC85-265VDC8.5-28VIsolationNon-isolationNon-isolationNon-isolationPhotoelectric isolationNon-isolationIsolated Group------14--Isolated Voltage------2500/5000Vr.m.s--Digital OutputOutput TypeRelayTransistor(NPN)Transistor(PNP)RelayRelayRated Voltage24VDC/220VAC24VDC24VDC24VDC/220VAC24VDC/220VACIsolation MethodRelay isolation--Relay isolationRelay isolationAnalog InputInput Type(DC0-10V)/8 inputs(DC0-10V)/8 inputs(DC0-10V)/8 inputs--(4-20mA)/2 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputsAnalog OutputOutput Type--------4-20mA/2inputsA/D Conversion--------12 bitsIsolationNon-isolationNon-isolationNon-isolationNon-isolationNon-isolationHigh-speed Operation Input Type4 inputs /10KHz4 inputs /10KHz4 inputs /10KHz--4 inputs /10KHzSupport single-phase counter and two-phase counterSupport single-phase counter and two-phase counterSupport single-phase counter and two-phase counter--Support single-phase counter and two-phase counter Output Type --2 outputs / 10KHZ2 outputs /10KHZ -- --Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulseSupports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse          TypeNote: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel.APB-12MRD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points relay outputAPB-12MTD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points NPN transistor outputQ2,Q3 can be high-speed output portsAPB-12MGD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points PNP transistor outputQ2,Q3 can be high-speed output portsAPB-22MRA(L)AC100V-240V14 points input8 points relay outputAPB-22MRD(L)DC12V-24V14 points digital input (the first 12