1sp0635D2s1-33 Single-Channel Plug-and-Play Driver with Master/Slave Operation IGBT Driver

MODEL: 1SP0635D2S1-331SP0635V2M1-33Power IntegrationsSingle-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC ConverterThe SCALEM-2 plug-and-play driver 1SP0635x2x1-33 is a compact single-channel intelligent gate driver designed for 3300V 130x140mm and 190x140mm IGBT modules.The master driver 1SP0635x2M1-33 features a fiber-optic interface with a built-in isolated DC DC power supply.It can be used as stand-alone driver or in conjunction with up to three 1SP0635D2S1-33 slaves to drive up to our parallel-connected IGBT modules.The turn-on and turn-off gate resistors as well as the auxiliary gate capacitor are not assembled in order to provide maximum flexibility. They must be assembled by the user before start of operation. Please refer to the paragraph on"Gate Resistor and Auxiliary Gate Capacitor Assembly" for the recommended values.Summary of FeaturesPlug-and-play solutionAllows parallel connection of IGBT modulesFor 2-level,3-level and multilevel topologiesFiber-optic links(master)Built-in interface to 1SP0635D2S1 (slave)Duty cycle 0...100%Dynamic Advanced Active Clamping DA2CDynamic IGBT short-circuit protectionMonitoring of supply voltageMonitoring of gate voltageExtremely reliable; long service lifeShortens application development timeSuitable for 3300V 130x140mm and 190x140mm IGBT modulesApplicationsTractionRailroad power suppliesLight rail vehiclesHVDCFlexible AC transmission systems(FACTS)Medium-voltage convertersIndustrial drivesWind-power convertersMedical applicationsResearchSpecifications   Specifications IGBT Voltage Class3300 VTechnologySCALE-2Power - Output/Channel (Max)3.00 WTemperature - Operating (Min)-40 ºCTemperature - Operating (Max)85 ºCInterface TypeFiber OpticNumber of Channels1Gate Peak Current (Max)+35 AProduct TypeBoardProduct Sub-TypePnP DriverSupported Module TypeIGBTMain/PeripheralPeripheralSupported Topologies2-level Voltage Source3-level NP-Clamped - Type 13-level NP-Clamped - Type 2Multi-Level NP-ClampedProtection FeaturesDynamic Adv Active ClampingOver-voltageShort CircuitUVLO(Sec-side)Driving ModeDirect-IndependentConnection Type to IGBTDirectSupply Voltage (Typ)15.00 VGate Turn-on Voltage+15.00 VGate Turn-off Voltage--10.10 VVoltage - DC Link Off state (60s)2700.00 VTime - Output Rise9.00 nsTime - Output Fall30.00 nsIsolation TechnologyGalvanicIsolation TypeBasicTemperature - Storage (Min)-40.00 ºCTemperature - Storage (Max)90.00 ºCGate Peak Current (Min)-35Product Details1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.  The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules. The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter. 1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring. Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.Fiber-Optic Interface OptionsFiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available: 1SP0635V, equipped with Versatile links1SP0635S, equipped with ST links For details, please check the product documentation.About Power IntegrationsPower Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.Energy-saving technologies such as our PowiGaN™ gallium-nitride technology a