Meanwell Elg-100 Series 100W 24V Power Supply Elg-100-24 Elg-100-24A Elg-100-24b LED Driver

Meanwell ELG-100 Series 100W 24V Power Supply ELG-100-24 ELG-100-24A ELG-100-24B LED DriverFeatures:Constant Voltage + Constant Current mode outputMetal housing design with functional GroundBuilt-in active PFC functionClass 2 power unitNo load / Standby power consumption 50000 hours5 years warranty Description:ELG-100 series is a 100W AC/DC LED driver featuring the dual mode constant voltage and constant current output. ELG-100 operates from 100~360VAC and offers models withdifferent rated voltage ranging between 24V and 54V. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40ºC ~ +90ºC case temperature under free air convection. The design of metal housing and lP67/lP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-100 is equipped with various function options,such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting systemApplication:LED street lightingLED architectural lightingLED bay lightingLED floodlightingType "HL" for use in Class I, Division 2hazardous (Classified) location.Specification:  MODELELG-100-24ELG-100-36ELG-100-42ELG-100-48ELG-100-54OUTPUTDC VOLTAGE24V36V42V48V54VCONSTANT CURRENT REGION Note.212 ~ 24V18 ~ 36V21 ~ 42V24 ~ 48V27 ~ 54VRATED CURRENT4.0A2.66A2.28A2A1.78ARATED POWER200VAC ~ 305VAC96W95.76W95.76W96W96.12W100VAC ~ 180VAC70W70W70W70W70WRIPPLE & NOISE (max.) Note.3200mVp-p250mVp-p250mVp-p300mVp-p350mVp-pVOLTAGE ADJ. RANGEAdjustable for A/AB-Type only (via the built-in potentiometer)21.6 ~ 26.4V32.4 ~ 39.6V37.8 ~ 46.2V43.2 ~ 52.8V48.6 ~ 59.4VCURRENT ADJ. RANGEAdjustable for A/AB-Type only (via the built-in potentiometer)2 ~ 4A1.33 ~ 2.66A1.14 ~ 2.28A1 ~ 2A0.89 ~ 1.78AVOLTAGE TOLERANCE Note.4±3.0%±2.5%±2.5%±2.0%±2.0%LINE REGULATION±0.5%±0.5%±0.5%±0.5%±0.5%LOAD REGULATION±1.0%±1.0%±0.5%±0.5%±0.5%SETUP, RISE TIME Note.61000ms, 80ms/115VAC500ms, 100ms/230VACHOLD UP TIME (Typ.)15ms/115VAC10ms/230VACINPUTVOLTAGE RANGENote.5100 ~ 305VAC142 ~ 431VDC continue,320VAC for 24Hrs; 360VAC for 1Hr(Please refer to "STATIC CHARACTERISTIC" section)FREQUENCY RANGE47 ~ 63HzPOWER FACTORPF>=0.97/115VAC, PF>=0.95/230VAC, PF>=0.92/277VAC@full load(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)TOTAL HARMONIC DISTORTIONTHD< 20%(@load>=50%/115VC; @load>=60%/230VAC; @load>=75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section)EFFICIENCY (Typ.)88%89%90%90%91%AC CURRENT1.1A / 115VAC0.6A / 230VAC0.5A/277VACINRUSH CURRENT(Typ.)COLD START 60A(twidth=850μs measured at 50% Ipeak) at 230VAC; Per NEMA 410MAX. No. of PSUs on 16A CIRCUIT BREAKER3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VACLEAKAGE CURRENT