100W LED Light Waterproof Power Supply IP67 with Good Quality

Basic Info.Model NO.AKP12100UsageLight, Industry, Construction, Digital Products, VehicleOutput Type Dual Driving MethodLED Regulator VoltageCircuit StructureElectronic Step-down TransformerCertificationCE, RoHSPower Supply ModeConstant Voltage SourceModulation SystemPFMIn-OutLifting Pressure TypePower Supply VoltageAC85-265Pack Sealing SizeSC-70BrandABBOutput Voltage DC12V Efficiency85%Output Curent8.33AOutput Power 100W Input Voltage 85-265V Waterproof IP67 Warranty 2 Years ApplicationLight, Industry, Construction, Digital Products,TrademarkAUKITransport Package50PCS/CTNSpecification210*68.5*43mmOriginShenzhen, ChinaHS Code85044014Product Description Product Description100W Waterproof led power supplyFeature:IP67 design for indoor or outdoor installationsProtections: Short circuit / Overload/Over temperatureCooling by free air convection100% full load burn-in testSuitable for LED lightingProducts through CE, RoHS Certification2 years warrantySpecification:MODEL05V60W12V60W24V60W DC VOLTAGE5V12V24V RATED CURRENT12A5A2.5A CURRENT RANGE0~12A0~5A0~2.5A RATED POWER60W60W60W NOTE.2RIPPLE & NOISE (max.)150mV150mV150mV NOTE.3VOLTAGE TOLERANCE±10%±4%±2% SETUP, RISE TIME80ms/220VACHOLD UP TIME (Typ.)60ms/220VACVOLTAGE RANGE170~ 250VACFREQUENCY RANGE50~ 60HzPOWER FACTOR (Typ.)PF>0.6/220VACEFFICIENCY (Typ.)77%80%81% AC CURRENT (Typ.)0.57A/220VACINRUSH CURRENT (Typ.)COLDSTART40A/220VACShort circuitProtection type :  recovers automatically after fault condition is removedOverloadoverload protected @ 145-160% above peak ratingOver temperatureProtection type : Shut down o/p voltage, re-power on to recoverWORKING TEMP.-30 ~ +50(Refer to output load derating curve)WORKING HUMIDITY20 ~ 99% RH non-condensing(Waterproof)STORAGETEMP.,HUMIDITY-40 ~ +80, 10 ~ 99% RHSAFETY STANDARDSCE Mark(LVD)  ,  IP67WITHSTAND VOLTAGEI/P-O/P:1.5KVAC   I/P-GND:1.5KVACEMC TestStandardsEN55015:2006; EN61547:1995+A1:2000; EN61000-3-2:2006;EN61000-3-3:1995+A2:2005; EN61347-1:2001; EN61347-2-13:20061. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 10uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.