Bipolar Pulse Micro Arc Oxidation Power Supply

OverviewMicro arc oxidation (MAO) is a new surface treatment technology developed on the basis of conventional anodization. It is a kind of technology that puts Al, Mg, Ti and other valve metals or their alloys in electrolyte, makes spark discharge on the surface of materials by electrochemical method, and forms in-situ oxidation film with ceramic characteristics on the surface of materials under the joint action of thermochemistry, plasma chemistry and electrochemistry.The micro arc oxidation power supply can be used for micro arc oxidation of aluminum alloy, magnesium alloy and titanium alloy (with different electrolyte), which should be reserved in the design.The micro arc oxidation treatment adopts a new electrolyte with long-term effect and no environmental limiting elements, which has the advantages of fast film forming speed, compact film and no loose layer. There is no waste gas escaping and no waste water discharging in the treatment process, and the cleaning water can be used as supplementary water for the oxidation tank in the oxidation process. Perfect technology, green environmental protection.Process plan2 Technical requirements for main processes(1) Oxidation: remove the floating dust and obvious oil on the surface of the workpiece before oxidation, and seal the parts that do not need to be oxidized.(2) SprayThe spray head direction and spray pressure are adjustable. The time was controlled in 1-2 minutes; The spray water shall be replaced once a week, and the wastewater after replacement shall be used as make-up water for oxidation tank.(3) Immersion washingThe soaking time is about 1-2min. The soaking water is replaced once a month, and the replaced wastewater is used as supplementary water for spraying.3 Main functions of Mao power supply:1. The power supply is designed and manufactured with high-power IGBT and full switch inverter circuit; 2. Users can set it according to the maximum value of the actual output power, constant current mode;3. The controller is designed and programmed by DSP digital chip to realize full digital control;4. 10 inch color touch screen display and operation;5. RS485 interface, optical fiber data transmission, can realize remote control and display, provide communication protocol;6. Air cooled, equipped with temperature probe to prevent excessive temperature difference;7. Over current, short circuit, over-voltage (high output voltage), over temperature (IGBT working temperature) and open phase protection;8. Constant current, manual constant voltage working mode;9. Multiple process curve setting, positive and negative pulse ratio setting;10. The power supply uses high-frequency inverter, and the output stage uses high-power IGBT as chopper;11. Cabinet size: width 1800, height 2000, depth 1000, (actual delivery size is subject to) spray plastic, gray white cabinet, wire drawing aluminum panel;Positive output working parameters: (can be adjusted according to customer needs)  Ma. power: 300kW or customedOperating voltage:at least+U from 80 to 800V;-U from 20 to 200V;Operating current:+ 300A or customed- 300A or customedFrequency:at least from 30 to 3000 HzDisplay:The machine is equipped with a display to control of set and actual parameters as well to provide the ability to connect a computer and perform real-time voltage and current strength measurements. Reports bugs in ongoing  processesOperating modes:Manual voltage control / automaticcontrol; Bipolar pulse or unipolar pulseconstant voltage output (CV) anddirect current (CA) operating modesPower supply:3-fase, 380V ACControl:Both positive and negative outputsfrequency, voltage, current andthe duration and number of work cycles can be adjustedseparatelyProtection:- Automatic overheating protectionagainst high voltage and currentstrength as well as phase mixing.- Built-in fan and watercirculation cooler (chiller)  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1