Tdd LTE 2350MHz 20W PA Module with Lna

TDD LTE 2350MHz 20W-PA Module with LNA TX(PA)Technical ParametersFrequency rang(MHz)2300-2400MHz Band Width(MHz)100MHzOutput Power@(25ºC)43±1dBmGain 50±1dBGain Adjustable rang≥20dBStep of Gain Adjustable≤1dBALC≥10dBError of Gain AdjustableTotal error ≤ ±1.5dB  ACPR≤-45dBcIn Band Ripple≤2.0dBVSWR≤1.5Out of Band Spurious9kHz~1GHz:≤-36dBm/30kHz1GHz~12.75GHz:≤30dBm/30KHzEVM≤3%Max. Input (no damage)0dBmRX(LNA)Technical ParametersFrequency rang (MHz)2300-2400MHzOutput power-5±1dBmGain 25±1dBGain Adjustable rang≥20dBStep of Gain Adjustable≤1dBError of Gain AdjustableTotal error ≤ ±1.5dB  In Band Ripple≤2.0dBNoise figure≤3.8dBVSWR≤1.5Max. Input (no damage)-10dBmOTHER SPECSTechnical ParametersPower Supply+28V; ≤3.5AStorage Temperature -40~+65ºCHumidity5%~95%Operating Temperature-25~+55ºC       POWER-6 Port for Power Supply:PIN 1 -------- RS485A; PIN 2 -------- RS485B;PIN 3-4 -------GND;PIN 5-------- P/L EN; Timing: 3.3v=PA on; 0v=LNA on;PIN 6 -------- DC+28V.        2. RF Connectors:  3 Connectors of MCX for PA IN & LNA OUT&PL EN TIMING1 Connectors of SMA-50KFD for ANT Monitoring for downlink PA and uplink LNA with Baud rate19200.LNA Monitoring Part.1.1 Setup module address(default=0),  1.2 Setup LNA Enable, ATT.PA Monitoring Part .2.1 Setup module address(default=0), on/off, ATT, ALC.2.2 Query function: Working status(Overpower, Overtemperature, VSWR, ATT), Alarm (over Temperature, over power, VSWR, PA Fault);2.3 Over Temperature Alarm:Alarm threshold +85ºC, meanwhile switch off PA, When   Temperature lower to +65ºC, switch on PA automatically.2.4 Over power alarm: when output power >Po+2dB2.5 PA Revers Power detection: Detect total power, Modulated signal test detection rang >20dBm, Detection accuracy