19mm Industrial Sensor SS316L Diaphragm Water Gas Oil Piezoresistive Silicon Pressure Sensor

  Product DescriptionPC9 Industrial Pressure Sensor    FeaturesWith constant current and constant voltage excitation optionsImported highly reliable pressure dieWide temperature compensationNormalized output availableCompensation board filled with glue for protection against moistureΦ19mm standard OEMAll 316L materialHigh performance, all solid, high reliability18 months warranty periodApplicationsProcess control systemsPressure calibration instrumentsRefrigeration equipment and HVAC controlHydraulic systems and valvesLevel measurementBiomedical instrumentsShips and navigationAircraft and avionics systemsWeaponr  Product Parameters  Electrical performance parametersPressure range-100kPa~0~10kPa…16MPaPressure referenceGauge pressure, Absolute pressure, Sealed gauge pressureExcitation1.5mA recommended for constant current10V recommended for constant voltageInput impedanceConstant current: 2kΩ~5kΩConstant voltage: 3kΩ~18kΩElectrical connectionGold-plated KOVAR pin or silicon soft wireCompensation temp.Constant current: 0ºC~60ºC(≤70kPa), -10ºC~70ºC(other ranges);Constant voltage: -20ºC~85ºCOperating temp.-40ºC~120ºCStorage temp.-40ºC~125ºCInsulation resistance≥200MΩ/250VDC  Response time≤1ms (up to 90%FS)Measured mediumAll the liquids and gases compatible with 316L.Mechanical vibration20g (20~5000Hz)Shock100g (10ms)Service life10×106 (cycles)Structural performance parametersDiaphragm material316LHousing material316LOil fillingSilicon oilSealing ringNBR or fluorine rubber  Basic parametersItemConditionMinNominalMaxUnitNoteNonlinearity -0.3±0.20.3%FSNote1Hysteresis -0.05±0.030.05%FS Repeatability -0.05±0.030.05%FS Basic parameters (cont.)ItemConditionMinNominalMaxUnitNoteZero output -2±12mV Full scale span output1.5mA, ≤10kPa 1.5mA, other ranges 10V, ≤10kPa10V, other ranges3060609890100150102mV Zero temp. coefficient10kPaother ranges-2-1.5±1.5±0.7521.5%FSNote2Span temp. coefficient -1.5±0.751.5%FSNote2Thermal hysteresis -0.075±0.050.075%FSNote2Long term stability -0.3±0.20.3%FS/Year Note:(1) Calculate according to BFSL least square method.(2) In the compensation temperature range, refer to 30 ºC for 0 ºC ~ 60 and -10 ºC ~ 70 ºC, and refer to 32.5 ºC for -20 ºC ~ 85 ºC.(3) After passing high and low temperature, return to the reference temperature.Pressure range selectionCodePressure referencePressure rangeOverpressureBurst pressureO-ring10kG0~10kPa300%FS600%FSNBR20kG0~20kPa300%FS600%FSNBR35kG, A0~35kPa300%FS600%FSNBR70kG0~70kPa300%FS600%FSNBR100kG, A0~100kPa200%FS500%FSNBR160kG, A0~160kPa200%FS500%FSNBR250kG, A0~250kPa200%FS500%FSNBR400kG, A0~400kPa200%FS500%FSNBR600kG, A0~600kPa200%FS500%FSNBR1MG, A0~1MPa200%FS500%FSNBR1.6MG, A, S0~1.6MPa200%FS500%FSNBR2.5MG, A, S0~2.5MPa200%FS500%FSNBR4MS0~4MPa200%FS400%FSNBR6MS0~6MPa200%FS400%FSFluorine rubber10MS0~10MPa200%FS400%FSFluorine rubber16MS0~16MPa200%FS400%FSFluorine rubber-100~0kPaOmitted-100~0kPa300kPa600kPaNBR(0~-100)kOmitted0~-100kPa300kPa600kPaNBRNP100kOmitted±100kPa300kPa600kPaNBR(-100~160)kOmitted-100~160kPa480kPa900kPaNBR(-100~250)kOmitted-100~250kPa750kPa1.25MPaNBR(-100~400)kOmitted-100~400kPa800kPa2MPaNBR(-100~600)kOmitted-100~600kPa1.2MPa3MPaNBR(-0.1~1.0)MOmitted-0.1~1MPa2MPa5MPaNBR(-0.1~1.6)MOmitted-0.1~1.6MPa3MPa9MPaNBR(-0.1~2.5)MOmitted-0.1~2.5MPa5MPa12.5MPaNBR Note: G: Gauge pressure, A: Absolute pressure, S: Sealed gauge pressureExample: PC9-10kG4wI1CPC9 pressure sensor, pressure range 10kPa, gauge pressure, 4 wire, 1.5mA excitation, current compensation.About Us:  CertificationsFAQ1.    Q: Are you manufacturer or trading company?         A: We are manufacturer which focuses on pressure sensor for 33 years. 2.    Q: What international certificates do you have?         A: ISO9001, CE, RoHS Certificated. 3.    Q: What is your production capacity?         A: We produced 1500000 pieces pressure sensor in year 2017. 4.    Q: What is the lead time of your product?         A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.         Note: lead time may vary base on different products. Please contact us for detailed lead time.  5.    Q: What is the warranty of your products?        A: Our warranty time is 18 months after shipment. 6.    Q: Do you provide customized products?        A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.     More info→ https://wotian.en.made-in-china.com/contact-info.html/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1