Rainbowally 230/400V, 40/60ka 1u Cabinet Pluggable SPD Panel Surge Protector Lightning

RPM-40/3N+NPG-1U(RPM-60/3N+NPG-1U) has built-in overheating and overcurrent protection function, which can provide class C(class B) (class II Classification Test) lightning protection for low-voltage distribution system.Features of RPM-40/3N+NPG-1U(RPM-60/3N+NPG-1U):    1. It is suitable for lightning and overvoltage protection of 5G plug-in frame power supply system     2.The structure is novel and compact,  and the required installation space is small (single P width is only 12mm), which meets              the installation height requirements of 1U chassis of plug-in frame power supply    3. Large current capacity and low limiting voltage    4.The operating voltage is appropriate and the protection circuit is stable    5. Built in over temperature and over-current protection, no freewheeling, high reliability and safety    6. The new locking device can ensure the stability and non loosening of the plug under the condition of high current impact and          strong vibration    7. Module pluggable structure, module anti misinsertion, replaceable and convenient maintenance    8. It has the functions of status indication and remote signaling alarm    9. DBN90°sheet terminal is used to crimp the flexible conductor and the wiring mode of insulation protection through heat                    shrinkable tube (the maximum section of the connecting conductor is 16mm2)   10. It is fixed with 4-M3*8 screws for convenient installationModelParameterRPM-40/3N+NPG-1URPM-60/3N+NPG-1USPD according to IEC 61643-1/11Class IISPD according to GB18802.1Type II Application3+1Nominal operating voltage Un230/400V,50/60HzMaximum continuous operating voltage Uc385V~(Varistor Uc:385V~,GDT Uc:255V~)Protection Voltage, UpL-N≤1.8Kv,N-PE≤1.0kVL-N≤2.0kV,N-PE≤1.1kVNominal discharge current In(8/20μs)20kA30kAMaximum discharge current Imax (8/20μs)40kA60kALeakage current to earth Ic≤20μAResponse timeL-N≤25ns, N-PE≤100nsInternal protective devicesBuilt- in thermal tripping deviceConnect wire terminalDBN 90 ° sheet terminal(DBN 5.5-16-90,DBN 8-16-90,DBN 14-16-90)Terminal crimping length16.0mmCross- sectional area of input wire Maximum 16mm2 (for flexible conductor)Conductor crimping installation force>100NFailure indicatorThe indication window turns into red when damagedRemote signalingAlarm dry contact(RSC: Remote Signal Contact),NC-COM contactPerformances of remote signal contactAC:250V/0.5A;DC:250V/0.1A, 125V/0.2A, 75V/0.5ACross-sectional area of the signaling wireMaximum 1.5mm2Installation modeFixed with 4-m3 * 8 screwsHousing materialPA66(FR:UL94-V0)Enclosure protection degreeIP20Dimensions (without terminals)138mm×48mm×40mmModule pluggable Pluggable module (applicable to pressure-sensitive or gas discharge tube module on the panel), easy to replaceDimension  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1