Hybrid Inverter/Charger Xtm 4000-48 DC to AC Pure Sine Wave Inverter UPS

*  Configured individually, in parallel, split-phase, or three-phase*  Power frequency inverter, no interference, high efficiency 95%, standby power consumption 2-3W*  5 main functions: It can be an off-grid inverter, battery charger, current injector, transfer system and provide support to an AC source.*  Battery charger adapted to OPzS, NiFe, Lithium, Redox Flow battery and VRB battery.*  Allows the Xtender to assist the AC source. the currents from both sources (AC-in and inverter) are combined output if the loads are more than the AC source can supply*  Information upload P.C.*  Available connect wifi module. log in the website , or download   SmartEss Monitoring app. you will see our company small solar system data.    Account: Aben1    Keyword: xh123456    Choose Default Node*  Used for lithium batteryInverter/Charger AdvantagesGGeneral Hybrid inverter built in MPPTWhen the hybrid Inverter built in MPPT breaks down, the whole machine has to be repaired or updated, and the     power system will be suspended.      No matter MPPT solar controller or inverter / charger fails, as long as a part of them is replaced, the whole off-grid power supply system can continue to work normally, and the cost is lower than replacing the hybrid Inverter built in MPPT. The important, VT-80 MPPT solar controller work with XTM inverter/charger, support remote control and programming.   Benefits of Buy Inverter1. It's not just the inverter, it also can charge the battery from generator, solar panel, grid power2. high efficiency 95%, it takes less time to fill the battery than other charger3. Warranty 5 years4. As same as Europe design and with competitive price5. Compatible Switzerland Studer products6. No magnetic interference, especially suitable for hospital precision instruments, banks, supermarkets, school and other large places7. Support inductive load Installation Instructions  Detailed Photos Packaging & Shipping   Product Parameters ModelXTM 1500-12XTM   2000-12XTM 2400-24XTM 3500-24XTM 2600-48XTM  4000-48Characterisation of the operating performanceNominal battery voltage 12V12V24V24V48V48VInput voltage range 9.5-17VDC9.5-17VDC19-34VDC19-34VDC36-68VDC36-68VDCContinuous Power1500VA2000VA2000VA3000VA2000VA3500VAPower 30 min.1500VA2000VA2400VA3500VA2600VA4000VAPower 5 Sec.3400VA4800VA6000VA9000VA6500VA10500VAMax.efficiency93%93%94%94%96%96%Own consumption stand by 1.4W1.4W1.6W1.6W2.0W2.1WOwn consumption stand by 8.0W10W9W12W10W14WAcoustic level without ventilation 40 dBAcoustic level with ventilation45 dBMaximum loadUp to short-circuit Maximum asymmetric load Up to Pcont.Load detection (stand-by)2 to 25 WCos φ0.1-1Output voltagePure sine wave 230Vac (±2%) / 120Vac (1)Output frequency45Hz-60Hz(1) ± 0.05% (crystal controlled)Harmonic distortion