Spot Sale Power Tap Press Fit Element PCB Connector Terminal Block for Auto Motivation Part M3 M4 M5 M6

Factory Direct Sales More than 10,000 specifications of fasteners available. Fast delivery, One-stop solutions. Annual Customer praise rate exceeds 98%. Efficient Productivity Technical support within a half-hour, Standard product lead-time around 1-2 weeks.And provide online service 24 hours a day. Reliability We always insist on integrity and responsibility, constantly innovative quality products, make our product more competitive. MaterialAluminum alloy,Brass,Stainless Steel,Carbon steel,according to customer's requirementFinishMilled /Tin plating, copper-plating,hot-dip galvanizing, black oxide coating,red anodized,black anodized,painting, powdering,rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc.Testing EquipmentCMM,Projector,Pull Tester,Automatic Optic Inspector,Projecting apparatusSalt Spray Test, Durometer, and Coating Analyzer,Tensile MachineManagement SystemISO9001:2008CertificationSGS,RoHS,Material Certication,PPAPProduction CapabilityAuto-lathe turning:ODΦ0.5-20mm,Tol.±0.01mmCNC lathe turning:ODΦ0.5-250mm,Tol.±0.005mmCNC Milling:800x600mm(LxW),Tol.±0.05mmGrinding:Tol.±0.002mmScrew heading & rolling:Metric 0.8-M6,Unified Imperial#0-1/4''Stamping:200T maxLead Time5-15 working daysSamplesWelcomeDelivery termBy DHL,UPS,TNT,FedEx,EMS,By Ocean,By AirWarrantyReplacement at all our cost for rejected productsSingle-piece Power Elements are used for the supply and distribution of highcurrents in connection with circuit board based systems. Depending on the pinarrangement and the layout, currents of up to 1,000A are possible. Meanwhilethis product group has been successfully used in the field in thousands ofvarious designs. The manufacturing method allows individual adaptionsregarding design and dimensions. That is the reason why Power Elementsperfectly qualify as connecting element for fuses, IGBTs, switches and cablesto the circuit board or as contact element for board-to-board respectively boardto-case.Application Possibilities• Board-to-board over 90°o r packaging• Wire-to-board screw connection of ring terminals• Electro mechanics such as hinges and case mounting• Spacers• Retainers / fastenings of switches, fuses, IGBTs• Any combination of all these and much moreProcessingIn-saiL PowerOne Power Elements are pressed in into the circuit board.Soldering is not necessary. Therefore, the PCBs are not exposed totemperature stress. This processing step easily blends in to the processingchain and is highly cost efficient. With the aid of the corresponding Press Fittools, several Power Elements can be pressed in simultaneously.• For assembling prototypes, no special equipment is needed for pressing in,a simple toggle press is sufficient.• The circuit board needs support during the pressing procedure.• The pressing force must be executed in a 90° angle to the circuit board.• After the pressing process the pins should stand out of the drilled hole (ca. 0.2- 0.5 mm).• Plated through holes of the circuit board must be executed according to ourindications.• PowerOne high current terminal blocks and spacers are manufactured forpressing, soldering is not intended.     /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1