125 Degree Single Wall Polyolefin Heat Shrink Tube for Electric Vehicle Bus Bar

Product DescriptionMaterial: cross-linked modified polyolefinOperating temperature:-55ºC~125ºCMinimum shrink temperature: 70ºCMinimum fully recovery temperature: 120ºCShrink ratio: 2:1 3:1 4:1Features:• halogen-free environment, low smoke, the product complies "RoHS", "REACH", • soft, flexible• UL224 VW-1 flammability• Excellent insulation, heat resistance and voltage performance.Application:widely used in electronics, subways,buildings, public facilities and so on.    Test ItemsTest MethodsPerformanceTemperature Rating UL224125ºCLength Rate Of ChangeASTM D2671-5ºC~+5ºCTensile StrengthASTM D638≥10.4MPaBreaking ElongationASTM D638≥200%Hot Air Aging Test158.0ºC/168h-Thermal Aging Tensile StrengthASTM D638≥7.3MPaHeat Aging Breaking ElongationASTM D638≥100%Voltage LevelUL224300V/600VVolume ResistivityASTM D2671≥1.0x1012cmBreakdown VoltageUL2242500V(60s) No BreakdownThermal StockUL224/250ºC±3ºC/4hDoes not drip, Does not flow, Does not crackWith heartASTM D2671≥70%SizeAs supplied (mm)after full Recovery(mm)Diameter(D)Thickness(T)Diameter(d)Thickness(t) 2:1 Ф0.7 1.0+0.2/-0.1 0.18±0.05 ≤0.40 0.32±0.08 Ф0.8 1.2+0.2/-0.1 0.18±0.05 ≤0.45 0.34±0.08 Ф1.0 1.5+0.2/-0.1 0.18±0.05 ≤0.60 0.36±0.08 Ф1.5 2.1+0.2/-0.1 0.18±0.05 ≤0.80 0.36±0.08 Ф2.0 2.5+0.2/-0.1 0.20±0.05 ≤1.00 0.42±0.08 Ф2.5 3.0+0.2/-0.1 0.22±0.05 ≤1.25 0.46±0.08 Ф3.0 3.5+0.2/-0.1 0.22±0.05 ≤1.50 0.46±0.08 Ф3.5 4.0+0.2/-0.1 0.22±0.05 ≤1.75 0.46±0.08 Ф4.0 4.6+0.2/-0.1 0.22±0.05 ≤2.00 0.46±0.08 Ф4.5 5.0+0.2/-0.1 0.23±0.05 ≤2.25 0.46±0.08 Ф5.0 5.5+0.2/-0.1 0.25±0.05 ≤2.50 0.50±0.08 Ф5.5 6.0+0.2/-0.1 0.25±0.05 ≤2.75 0.50±0.08 Ф6.0 6.5+0.2/-0.1 0.25±0.05 ≤3.00 0.55±0.10 Ф6.5 6.9+0.2/-0.1 0.25±0.05 ≤3.25 0.55±0.10 Ф7.0 7.5+0.2/-0.1 0.25±0.05 ≤3.50 0.55±0.10 Ф8.0 8.5+0.3/-0.1 0.28±0.06 ≤4.00 0.58±0.10 Ф9.0 9.5+0.2/-0.1 0.28±0.06 ≤4.50 0.58±0.10 Ф10 10.5+0.3/-0.1 0.28±0.06 ≤5.00 0.58±0.10 Ф11 11.5+0.3/-0.1 0.28±0.06 ≤5.50 0.58±0.10 Ф12 12.5+0.3/-0.1 0.28±0.06 ≤6.00 0.58±0.10 Ф13 13.5+0.3/-0.1 0.28±0.06 ≤6.50 0.58±0.10 Ф14 14.5+0.3/-0.1 0.28±0.06 ≤7.00 0.58±0.10 Ф15 15.5+0.3/-0.1 0.28±0.06 ≤7.50 0.58±0.10 Ф16 16.5+0.3/-0.1 0.28±0.06 ≤8.00 0.58±0.10 Ф17 17.5+0.3/-0.1 0.28±0.06 ≤8.50 0.58±0.10 Ф18 18.5+0.3/-0.1 0.32±0.08 ≤9.00 0.68±0.10 Ф20 20.6+0.5/-0.2 0.32±0.08 ≤10.0 0.68±0.10 Ф22 22.6+0.7/-0.2 0.35±0.08 ≤11.0 0.72±0.12 Ф25 25.6+0.7/-0.2 0.40±0.10 ≤12.5 0.78±0.12 Ф28 28.6+0.7/-0.2 0.40±0.10 ≤14.0 0.78±0.12 Ф30 30.6+0.7/-0.2 0.40±0.10 ≤15.0 0.82±0.12 Ф35 35.6+0.7/-0.2 0.45±0.10 ≤17.5 0.92±0.12 Ф40 41.0±0.5 0.50±0.12 ≤20.0 1.00±0.15 Ф45 46.0±0.5 0.50±0.12 ≤22.5 1.00±0.15 Ф50 51.0±1.0 0.55±0.15 ≤25.0 1.10±0.15 Ф55 55.5±1.0 0.55±0.15 ≤27.5 1.10±0.15 Ф60 60.5±1.0 0.60±0.15 ≤30.0 1.25±0.20 Ф70 71.0±1.0 0.60±0.15 ≤35.0 1.25±0.20 Ф80 81.0±1.0 0.60±0.15 ≤40.0 1.25±0.20 Ф90 91.0±1.0 0.60±0.15 ≤45.0 1.25±0.20 Ф100 101.0±1.0 0.60±0.15 ≤50.0 1.25±0.20 Note: Other sizes and colors can be available upon request   Other Products Certifications  Packaging & Shipping Company ProfileShanghai Wellco International Limited is a professional Team with 18years experience for R & D, production, sales of special heat shrink Tube and other radiation crosslinking materials manufacturers. We concentrate on to providing all kinds of products and solution for Insulation,Connection,Waterproof, high temperature ,Chemical resistant ,EMI and mechanical protection for the wire and cable .The company has strong technical force with 20 years experience and advanced production equipment. We can supply (such as modified PE, PVDF, FEP, EPDM, Silicone, FKM, FEP, PTFE Etc materials)heat shrink tube and insulation tube. The products are widely used in the fields of electronic communication, automobile, high-speed rail, electric motor, aviation, medical and other fields, such as insulation, water-proof, electrostatic shielding, oil-resistant, chemical and high-temperature resistant Protection, etc. Our products have passed UL certification ,RoHS ,REACH.We also can produce customized products or develop products with special requirements according to customer requirements, and we carry out our production according to ISO9001 and IATF16949 quality management system standards to ensure the stability and reliability of product quality.  FAQ1. who are we?We are based in Shanghai, China, start from 2017,sell to North America(20.00%),South Asia(20.00%),Southeast Asia(15.00%),Western Europe(15.00%),South America(5.00%),Eastern Europe(5.00%),Mid East(5.00%),Northern Europe(5.00%),Eastern Asia(3.00%),Domestic Market(3.00%),Southern Europe(2.00%),Africa(00.00%),Central America(00.00%). There are total about 5-10 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Heat Shrink Tube/Heat Shrink Mould Par