Ulela Sodium Ion Battery Energy Storage Battery Factory 100 Ah 12V Lead Acid Battery China Lead Acid Batteries for Solar Charge

Ulela Sodium Ion Battery Energy Storage Battery Factory 100 Ah 12V Lead Acid Battery China Lead Acid Batteries For Solar ChargeTechnical BackgroundThe Energy Storage Battery Is An Indispensable Energy Storage Component Of The Solar Photovoltaic Power Generation System. Its Main Function Is To Store The Electric Energy Of The Photovoltaic Power Generation System And Supply Power To The Load When The Amount Of Sunshine Is Insufficient, At Night, And In An Emergency. Commonly Used Energy Storage Batteries Include Lead-Acid Batteries, Alkaline Batteries, Lithium Batteries, And Supercapacitors. They Are Used In Different Occasions Or Products. At Present, Lead-Acid Batteries Are The Most Widely Used. The Main Commonly Used Batteries Are Sealed Lead-Acid Batteries, Valve-Controlled Type Lead-Acid Batteries, Rechargeable Lead-Acid Batteries, Vrla Lead-Acid Batteries.Lead-Acid BatteriesLead-Acid Battery Is A Chemical Energy Storage Device That Uses Lead And Lead Dioxide As The Negative And Positive Active Materials Of The Battery And Uses Dilute Sulfuric Acid As The Electrolyte. It Has High Power Conversion Efficiency, Long Cycle Life, High Terminal Voltage, Strong Safety, And High-Cost Performance. With The Characteristics Of Simple Installation And Maintenance, It Is Currently The Preferred Chemical Power Source In Various Energy Storage, Emergency Power Supply, And Starting Devices. Working PrincipleDuring The Day, Sunlight Irradiates The Solar Modules, Causing The Solar Cell Modules To Generate A Certain Range Of DC Voltage, Converting The Light Energy Into Electrical Energy, And Then Transmitting It To The Intelligent Controller.After The Overcharge Protection Of The Intelligent Controller, The Electrical Energy Transmitted From The Solar Modules The So-Called Storage Battery Is An Electrochemical Device That Stores Chemical Energy And Releases Electrical Energy When Necessary. characteristic1 Better Deep Cycle Capability, Good Overcharge, And Over-Discharge Capability.2 Long Life, Special Process Design, And Colloidal Electrolyte Guarantee Long Life Battery.3 Applicable To Different Environmental Requirements,Such As Batteries That Can Be Used Normally Under Different Conditions Such As High Altitude, High Temperature, And Low Temperature. Common Lead-acid Batteries-Sealed lead acid battery-VRLA battery-Rechargeable lead-acid battery-Vrla lead-acid batteryThe Main Components1) Plates: Both Positive And Negative Plates Are Obtained By Coating Active Materials On Special Alloy Grids. The Plates Store And Release Energy During Charging And Discharging To Ensure Reliable Capacity And Performance Of The Battery2) Separator: It Is An Isolation Medium Placed Between The Positive And Negative Poles Of The Battery To Prevent The Short Circuit From Direct Contact Between The Positive And Negative Poles Of The Battery3) Electrolyte: The Electrolyte Of Lead-Acid Batteries Is Dilute Sulfuric Acid Prepared With Distilled Water. The Electrolyte Plays The Role Of Transporting Ions Between The Positive And Negative Electrodes During Charge And Discharge, So The Electrolyte Must Be Free Of Impurities4) Container (Battery Shell Cover): The Container Covered By The Battery, The Electrolyte And Plate Are All In The Container, Which Mainly Plays A Supporting Role, And At The Same Time Prevents The Internal Material From Overflowing, And External Material Enters The Internal Structure And Pollutes The Battery. Product Parameters    Product NamePhotovoltaic Lead-Acid BatteryKeywordsSolar Lead Acid BatteryDimension522mm*288mm*222mm or CustomizedRated Voltage12VApprox Weight90.7kgContainer MateriABSMax.Charging1000A Or CustomizedMax. Discharge Current3000A(5s)Internal Resistance(25ºC)Approx 2.4mΩCharge voltage(25ºC)223-227V/cell Or CustomizedSelf Discharge