Delixi Cdm3t Moulded Case Circuit Breaker

Shell frame currentCDM3LT-125CDM3LT-250Rated voltage Ue(V)400/415400/415Rated current In(A)16/20/25/32/40/50/63/80/100/125100/125/140/160/180/200/225/250Rated insulation voltage Ui(V)800800Rated impulse withstand voltage Uimp(kV)88Pole4(A,B)4(A,B)Rate(Hz)50Hz50HzRated residual operating currentI △ nmA (adjustable in three gears)Non delay type30mA,100mA,300mA30mA,100mA,300mA100mA,300mA,500mA100mA,300mA,500mADelayed type100mA,300mA,500mA100mA,300mA,500mARated residual operating current IAnmA (fixed type) (special order)30,100,300,500mA30,100,300,500mAProduct modelNumber of polesTrip modeAccessoryProtection typeFour-pole typeOperation methodInstallation methodLimit non-drive timeCDM3LT4 poles2: Single magnetic trip3:Thermal magnetic trip00: No accessory08: Alarm10: Shunt20: Aux.40: Shunt + Aux.60: Two sets of aux.18: Shunt + Alarm28: Aux. + AlarmDefault: Power distribution protection2: Motor protectionA: Three protective poles with neutral lines that cannot be open and closedB: Three protective poles with neutral lines that can be open and closedDefault: Operation via fixed handleDefault: Fixed type front-panelDefault: Non-delayDelay 1: 0.1/0.2/0.3sDelay 2: 0.4/0.5/1sNotes: 1. Shunt/aux./alarm contacts have terminal and wire lead types, and the wire lead type is available as standard configuration; the default length of the wire lead is 500mm2. Standard configuration for conventional product: phase partition and mounting screws (no wiring copper bar)3. Fixed delay product shall be specially ordered;4. For breaking capacity values, refer to the specimen or the information on the front side of product 5. The rated residual operating current is 30/100/300mA; only non-delay type product is provided./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1