DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply

DIN rail plastic enclosure 60w 120vac to 12vdc switching power supply Features:1. AC input range selectable by switch2. Protections: Short circuit / Overload / Over voltage / Over temperature3. 100% full load burn-in test4. Low cost, high reliability5. 24 months warranty MODELMDR-60-5MDR-60-12MDR-60-24MDR-60-48   OUTPUTDC VOLTAGE5V12V24V48VRATED CURRENT10A5A2.5A1.25ACURRENT RANGE0 ~ 10A0 ~5A0 -2.5A0-1.25ARATED POWER50W60W60W60WRIPPLE & NOISE (max.)80mVp-p120mVp-p150mVp-p200mVp-pVOLTAGE ADJ. RANGE5 -6V12-15V24 - 30V48 ~ 56VVOLTAGE TOLERANCE±2.0%±1.0%±1.0%±1.0%LINE REGULATION±1.0%±1.0%±1.0%±1.0%LOAD REGULATION±1.5%±1.0%±1.0%±1.0%SETUP, RISE TIME Note.5500ms, 30ms/230VAC 500ms, 30ms/115VAC at full loadHOLD UP TIME (Typ.)50ms/230VAC 20ms/115VAC at full load     INPUTVOLTAGE RANGE85 - 264VAC 120-370VDCFREQUENCY RANGE47 ~ 63HzEFFICIENCY (Typ.)78%86%88%87%AC CURRENT (Typ.)1.8A/115VAC 1A/230VACINRUSH CURRENT (Typ.)COLD START 30A/115VAC,60A/230VACLEAKAGE CURRENT100M Ohms/500VDC/25°C/70% RHEMC EMISSIONCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3EMC IMMUNITYCompliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A    OTHERSMTBF299.2K hrs min. MIL-HDBK-217F (25°C)DIMENSION40*90*100mm (W*H*D)PACKING0.33Kg; 60pcs/20Kg/0.82CUFT      NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies.5. 5.Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1