Hight Power UVA 370nm 375nm 380nm 385nm 390nm 395nm 400nm Fiber-Coupled LED Pigtailed LED Source with SMA905 FC/APC Connector

Hight Power UVA 330nm 335nm 340nm 350nm 355nm 360nm 365nm Fiber-Coupled LED Pigtailed LED Source with SMA905 FC/APC ConnectorA, Feature of  UV LEDReliable UVC LEDs for SensorsDemands for monitoring in applications like water quality analysis are growing, driving the development of new cost effective, on-line sensors and instruments. Greenergy UVC LEDs are designed and tested to meet the performance and reliability needs of discerning professionals in sensor design, bringing lab quality measurements down into distributed and remote devices.Enables Real-Time MonitoringOn-line monitoring means instant insights and reaction. UVC LEDs, with instant on/off abilities, give immediate measurement data continuously or at set intervals, only using power for the fraction of a second required. Built for Critical ParametersWith easily selectable peak wavelengths from 250 nm to 280 nm, Greenergy devices are specified to directly align with measurement needs, no extra filtering or optics required. UVT, BOD/COD, TOC, Oil-in-Water, or custom UVC parameters are all possible using a UVC LED based measurement platform.Long Term Accuracy and ReliabilityWith tightly controlled spectral quality, power output stability, and consistent lifetime performance over years, sensors using Greenergy  UVC LEDs maintain measurement accuracy from the development bench to the field location.Modernizing MeasurementTo increase frequency and density of data points, or better manage the costs of data collection, sensors based on UVC LEDs are taking the leading position. Greenergy helps industry leaders move beyond time consuming grab sampling methods and costly lamp based systems like mercury or xenon. B,Specification of  Greenergy New 265nm 254nm 250nm Deep UV LED for germicidal Equipment1,                Absolute Maximum Rating            (Ta=25ºC)             ItemSymbolValue Unit DC forward currentIF100 mA Power dissipationPD960 mW Operating temperatureTopr"-40~+60 ºC Storage temperatureYstg-40~+80 ºC Reverse voltageVR5 V Sold soldering temperatureTsol260ºC/3Sec --- Plus with Max 10ms,duty ratio max1/10                2  ,            Initial Electrical/Optical Characteristics                               (Ta=25ºC)       Item SymbolconditionMinTypeMaxUnit DC forward Voltage VFI=100mA56.58V DC reverse Current IRV=5V--------5μA Wavelength WpI=100mA250255260Nm FWHM(nm) ΔλI=100mA----11----Nm Output Power Pout(mW) IVI=100mA1 3mW 50%Power Angle 2θ1/2I=100mA----7----deg          3,     Typical Electrical & Optical Characteristics at TA = 25°C       Wavelength (nm) Part No.Dimension (mm)Optical Output Power[mW]   IF /100mA VoltageVF[V]Viewing Angle5θ%[°]minmaxminmax255nm±5 GL255-TO39HTO3913587  Our factry                                                                                                                                                              Why you choose Greenergy                                                                                                                                                         1,Partners in the Workplace,A list of outstanding organizations we have teamed with to help building a successful quality controlling program.2,Our UV LED Bulb are sold to reseller professionals in over 50 countries worldwide for years.3,All of our UV LED Bulb  made fresh within one month of your order, and has a two year warranty.4, UV LED Bulb   in the China in accordance to strict industry regulations.5,All of UV LED Bulb   are subject to continuous laboratory quality testing.6,We offer top quality light fixtures for prices well below the market standard. Quality Control:                                                                                                                                                    In order to continuously enhance the quality of management and meet customers' needs, we have passed through the ISO9001 quality management system certification  fixtures modern are produced through standard procedures conducted by trained staffs. 100% of the led light fixtures will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test its temperature after 24 hours lighting. Then after it is cool we again test 100% of the lamps to see if it still work well . Each led Cabinet light should pass all these QC procedures before the packing. Trade Terms:                                                                                                                                                            1. Payment term: T/T, L/C ,Western Union,Paypal 2. Lead time : normally in 5~10 days after confirmation . 3. Sample policy : Samples are always availble for each model,though it will be charged. 4. Shipping port: Changsha , ChinaDelivery detail:                                                                                                                                                           Carrier is available by express,or sea shippiung or ordinary air cargo, Our