Chziri Manual Motor Starter Soft Starter Motor Soft Start 115kw Ce Certificate

FROM CHZIRI SOFT STARTER ZJR2-31150  ZJR2  has the following characteristics:1.16 SCM control, intelligent all-digital display;2.can be put into practice a soft starter control multiple motors;3.Starting modes: Current limiting starter, Voltage ramp start , Kick start +current-limiting  start,kick start +voltage ramp start.Current ramp start.Voltage current-limiting double closed -loop start.4.free stop  and soft stop,The stop time from 0 to 60 seconds can be arbitrary choosed5.Over current,Overload,Open phase,instantaneous stop and other fault protection.with the flow,over loading,lack phase,instantaneous stop,and other malfunction protection;6.Easy installation,simple operation,strong function and reasonable prices;Technical IndicationsItemItem DescriptionInput Power SupplyInput VoltageThree Phase 380V-15% ~ 415+10%Frequency50/60HzAdaptive MotorSquirrel-cage three-phase asynchronous motorStarting TimesIt is recommended not to exceed 20 times per hour.Control Mode1) Operation panel control; 2) Operation panel + external control; 3) External control; 4) External control + COM control; 5) Operation panel + external + COM control; 6) Operation panel + COM control; 7) COM control; 8) No start or stop operation.Start Mode1) Current-limiting start; 2) Voltage ramp start; 3) Kick start + current-limiting start; 4) Kick start + voltage ramp start; 5) Current ramp start; 6) Voltage current-limiting double closed-loop start.Stop Mode1) Soft stop; 2) Free stop.Protective FunctionOpen loop protection for external instantaneous stop terminals; 2) Over-heat protection for soft starter; 3) Protection for too long starting time; 4) Input open phase protection; 5) Output open phase protection; 6) Unbalanced three-phase protection; 7) starting over current protection; 8) Running overload protection; 9) Under voltage protection for power voltage; 10) Over voltage protection for power voltage; 11) Protection for fault parameter setting; 12) Load short circuit protection; 13) Auto restart or incorrect wiring protection; 14) Incorrect wiring protection of external control stop terminals.AmbientPlace to be usedIndoor location with good ventilation free from corrosive gas and conductive dust.AltitudeBelow 3000M. It have to rise the rate power when the altitude is more than 3000M.AmbientTemperature-30~+55ºCAmbient Humidity≤90%RH without dew condensation.Vibration