Swing Gate Opener, Heavy Duty, Both AC and DC

HEAVY-DUTY SWING GATE OPENER DC MOTOR 1022.101DThis heavy duty swing gate opener set has got two 24VDC motor, low voltage safe for home, and can be frequently used without getting hot and stop.It can handle the max gate width 5 meter or max 1000kgs/leaf, and it can resist the big wind for solid gate.This is a mature product and has been installed and tested in extremely cold countries for more than 12 years. It features the long lifetime, anti-low temperature lubrication, strong motor force, rusty-resistant gear parts, intelligent soft start and soft stop, reverse against obstruction, with connection port for access control, photocell, loop detector and etc.This is a very briliant product for home, industrial swing gates.Features: *Driven by thread pole*Mechanical limit switch, the opening angle adjusted inside the motor                                                                 *In case of power failure, the gate can be opened and closed manually by release clutch*The battery can remain on working for 6 hours(DC motor)*Soft start and stop  Technical parameter:Specifications1022.1011022.101D Gate width (m)2~5Gate weight (kg)400~1000Power supply(V)120/230 AC24DCPower(W)150 Revolution(rpm)1400Travel time(sec.)17Noise(dB)≤56Water proof(IP)                     44 Environment temperature(ºC)-45~+65Standard Accessories:Remote controls: 433.92Mhz rolling code remote transmitter, 100m remote distance in open spaceControl box: It has got full power start or soft start and soft end function. For very big gate, we can set full power start; For normal size gates, we can set soft start and end to protect the gate and gate motor. Optional accessories:Safety beam sensor(15m)2062.107A When the gate is closing, anything interrupts the photocell emitter and receiver, the gate will return to open and remain in open until the obstacles move way. This is to protect people and property from injuring from the automatic gateWireless keypad RT-KP1: Input the password, the keypad will send the radio out, when the receiver on the control panel received this radio signal, the gate will open. No need to take the remote control in handAlarm lamp:  It has got 220V, 110V and 24V type. When the gate is moving, the control panel will assign electricity to flash light to blink and flash, which is to remind people to pay attention to the moving gates.Electric lock 3023.001: Gate stopper installed on the ground, and lock body fixed at the bottom of gate wing. When gates closed and reaches the stopper, the lock bolt will drop into the lock hole. Its fail safe model. When the power is cut, the lock will remain locked. This will help the gate resist the big wind or prevent theft attempts from opening the gate from outside. /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1