A SERIES OF MATERIALS USED FOR VACUUM CONSUMABLES:1) RELEASE
FILM:RF35 Perforated Release Film is a red/blue color PE release
film that is designed for low cost applications. It will release
from epoxy, polyester and vinyl ester resin systems. It is
suitable for resin cure temperature up to 250°F
(121°C).Reference:Example:RF35-1200-500Material: PEThickness:
35umWidth:1200mmLength:500mApplication:Perforated Release Film RF35
is most commonly used in vacuum infusion processing.Features And
Benefits: Red/Blue color is visible on laminate
surface.Good value for low to medium temperature
applications.Available in P16 perforation style, especially for
infusion applications. Technical Parameters:Material
type:
PE Elongation at break:
500 %
ATP
5042Tensile strength:
4350 psi (30
MPa)
ATP 5042Maximum use temperature:
250°F (121°C) Materials to avoid:
Phenolic resins/Strong oxidizersColor:
Red/blue 2) Vacuum Bagging Film:Vacuum bag BF65
is a wide multi-layer extruded Nylon film providing multiple layers
of safety. These multi layers reduce the concerns of pinholes,Weak
spots, brittleness and inconsistency in films. This Vacuum bag is
strong, has a high elongation and is suitable for cure temperature
up to 170C.We provide various width and roll length , for more
information please contact us.Features:High temperature resistance
suitable for multi resin systems.Wider films save time and money
spent seaming film for large parts.Reduce scrap risk due to vacuum
loss with multi-layered vacuum security.Wider films and good
mechanical strength reduce risk of scrap parts due to leakage at
seams.Application:Vacuum bagging applications .(not recommended for
autoclave application).Typical Specifications: Physical
PropertyUnitsSpecificationTest
MethodThicknessum65 Material-Nylon,Multi-Layer Color-Ligth
Yellow Working TemperatureCMax 170 Elongation%350ASTM
D882Tensile strengthMpa34ASTM D882Roll WidthmMax 12-Roll lengthmMax
200-Forms-V,W Fold-3) Infusion Mesh:Resin distribution media IM120
is HDPE extruded net/mesh designed to assist resin flow through
your part during the VARTM process. Our resin distribution medium
works well with polyester ,vinyl ester and epoxy resins. This resin
distribution media is low profile and tight construction, the resin
flows more easily and efficiently (little waste) throughout the
lay-up when using this resin distribution media.We provide
different area weight and width, for more information please
contact us.Features:Low resin waste.This product is an extruded
net/mesh and does not fray when cut.The color fastness is good
under working temperature, will not contaminate the
products.Application:Resin distribution of Vacuum bagging
applications.Typical Specifications:Physical
PropertyUnitsSpecificationPhysical
PropertyUnitsSpecificationThicknessmm1.0+-0.2Thicknessmm1.0+-0.2WidthmMax
4WidthmMax
4Lengthm100Lengthm100Color-GreenColor-GreenMaterial-HDPEMaterial-HDPEWorking
TemperatureC120Working TemperatureC120Style-WeaveStyle-RhombicArea
Weightg/m2120-240Area Weightg/m2100-2404) Spiral Tube:This plastic
spiral tube is made of HDPE and used to provide a very free‐lowing
channel through which the resin is distributed near the point where
the resin is first fed into the composite. Resin flows freely
through the center of the spiral tube, but just as easily out of
the spirals in the side, allowing resin to be supplied all the way
along an edge of the composite.Features:Low material cost.HDPE
material, strong tube wall makes the spiral tube not deformed under
atmospheric pressure.Application:Resin distribution of Vacuum
bagging applications.Typical Specifications:Physical
PropertyID*OD(MM)ID*OD(MM)ID*OD(MM)ID*OD(MM)ID*OD(MM) 8*1010*1212*1416*1919*23MaterialHDPEHDPEHDPEHDPEHDPEThickness1mm1mm1mm1.5mm2mmColorWhiteWhiteWhiteWhiteWhiteWorking
Temperature120C120C120C120C120CLength100m100m100m100m100m5) Sealant
Tape:Sealant tape ST12 is synthetic rubber sealant tape used to
provide a continuous airtight seal between the vacuum bag and the
mold around the perimeter of the mold. The sealant tape may also be
used to seal the point where the manifold enters the bag and to
repair leaks in the bag or plumbing.The sealant tape ST12 is a cost
effective vacuum bag sealant tape for room and medium temperature
applications. It has been specially formulated to provide excellent
tack, firm feel, good clean-up and long shelf-life.Features:Lower
material cost.Long shelf life reduces waste.Easy clean up reduces
cost and times of tool cleaning.Different tack version has better
tack for different environments, easy to use.Application:Vacuum
bagging applications. (Not recommended for autoclave
application).Typical Specifications:Physical
PropertyUnitsSpecificationTest
MethodThicknessmm3 Widthmm12 Lengthm15 Color-Yellow M
Related products about 50um Nylon Vacuum Bagging Film for Yacht
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup