Customized Polyamide Mould PA6/PA66 Extrusion Profile Extrusion Die for Extrusion Press for Making Aluminium Profile Section Extrusion Mold

Product DescriptionCustomized Polyamide Mould  PA6/PA66 Extrusion Making Tool factory priceOur Advantages1. DIE HEADUse the removable positioning device,making it easier to disassemble. Precise material flow control and stable extrusion.The hidden heating design has increased the brightness pf the product surface.The special balance of the pressure holes has lowered the rejection rate. customized PE single cavity Wall Panel Extrusion moldtool making2. CALIBRATORThe automatically adjusting positioning key gives it a precise size .The tapered design of the styling sets has increased the production speed greatly.The inlet end is independent vacuum and shapes well.The camber adjusting device ensures that the line is straight3. WATER TANKThe combination design of eddy current and spray makes it cools fastThe self-adjusting water tank panels are easy to adjust.The stainless steel frame type system can prevent damage.The special in fluent distribution gives it a cooling balance.4. Mouth mold, mold core, finalize the design mode, finalize the design mode and one end of the mold core connection with convex sets, finalize the design mode on the other end of the end face with discharging mouth, name and address of convex surface is equipped with inlet, feed port and discharging port connected to form a fixed mold, the mold core including core rod, cross arm,connection on both ends of the transverse arm fixed arm, at the bottom of the plug connection in central cross arm, has purethrough its internal mold core The water cooling flow channel, the boss is provided with a through groove for the arm through, anda gap is arranged between the inner wall of the through groove and the outer wall of the arm. Using the structure, the invention has the following advantages :1. Avoid the roughness of the product inner cavity caused by the high temperature of the mold in the forming process, improve the smoothness of the product inner cavity and improve the product performance; 2.the fixed arm of the mold core and the fixed seat of the mold are clamped and firmly connected.Product Parameters No Product Name Product Material Configuration 1 Die mold 3Cr13 1 or multi-cavity 2 Heating bands Cast-aluminium/Stainless steel / 3 Calibrator 3Cr17 1-5 240mm 4 Water tank Steel / 5 Water stop sheet Steel 4-24 sheets Detailed Photos Product test resultsNO.Test ItemsTechnical RequirementsUnitsMeasured ValueSingle Conclusion1Extrusion speed0.8-1.8m/min0.87conform2Yield>98%99conform3Thickness deviation