Aluminium Extrusion Press Aluminum Extrusion Press Machine by China Manufacturer

I.Product Descriptions & Name:Aluminium Extrusion Press aluminum extrusion machine   Aluminum Extrusion Press Aluminium Extrusion Machine 880T 1100T 1350T 1650T 1800T 2000T 2200T  2500T  2600T 3000T 3500T 4500T 5500TII.Product Pictures for aluminium extrusion press machine line : III.Product Features of Aluminium Extrusion Press:1.Once the desired shape for the finished profile has been developed and the appropriate aluminum alloy selected, an extrusion die, and associated tooling, is produced.2.The actual extrusion process begins when the press ram starts applying pressure to the billet within a container. the pressure capacity of a specific press determines how large an extrusion it can produce. 3.As pressure is applied, the billet is first crushed against the die, becoming shorter and wider until its expansion is restricted by the container walls. Then, as the pressure increases, the soft (but still solid) aluminum has no place else to go and begins to squeeze out through the shaped die to emerge on the other side as a fully formed profile. 4.The formed profile is cut off at the die and the remainder of the metal is removed to be recycled. After it leaves the die, the still-hot extrusion may be quenched, mechanically treated, and aged to impart desired metallurgical properties and physical performance. 5.After sufficient aging, whether in an aging oven or at room temperature, the profiles are moved to other areas of the plant and may be finished (painted or anodized), fabricated (cut, machined, bent, welded, assembled), or packed for shipment.IV.Specifications of Aluminium Extrusion Press (127mm)  Billet size:ф127mm (5 inch), maximum length 700mm  Diameter of main cylinder piston:750mmDiameter of side cylinder piston:180mm*2 piecesDiameter of container piston:160mm*4 piecesDiameter of shear piston:140mmTotal extrusion strength:220kg/cm2                  1083MTMain cylinder extrusion:220kg/cm2                   971 MTSide cylinder extrusion:220kg/cm2                   112 MTContainer lock-up:200/kg /cm2                 160 MTShear:160/kg/ cm2                  25 MT  Main oil pump:A15VSO-210 (Rexroth,made in Germany)Auxiliary pump:SQP4-60-86D(Tokimec, made in Japan) SQP43-60-38-86DD(Tokimec, made in Japan)  High pressure hydraulic valves: RexrothLow pressure valves:Taiwan Jeou Gang  Main cylinder:35# forged steel (entire piece)Main piston:chilled cast ironFront plate:45# forged steel   (450mm)Die stack:45# forged steelCrosshead:45# forged steelTie rod:42crmo steel (¢210mm), with pre-stressed sleeveContainer housing:Q345 steel structureContainer tire:5crmnmoContainer liner: H13 forged steelStem:    H13 forged steelDummy block:H13 forged steelBottom shelf:35# H steel and steel plate welding V.Equipment list for Complete turnkey plant aluminium extrusion press machine line1.Features of aluminium extrusion Press 1).High rate of finished products2).High production capacity3). low breakdown rate and quick service4).easy operation 2.Aluminium extrusion die heaterDie oven use infrared heating structure, energy saving, high efficiency, low consumptionBefore extrusion, the die of profile must be preheating, after heating and keeping temperature, send to extrusion press.Adopts drawer type, side opening door, one working chamber. Use crane to carry mould, before put mould, manually open oven door through pneumatic cylinder, then put mould inside of chamber, close door, start electricity heating system, then start heat-up(must preheating chamber when first time heating mould). After reaching sized value of temperature(normally it is 480ºC), keep heating, then open furnace door, draw out mould to send for extrusion press.Infrared die oven use several carbon electricity rods to heat, play a part in high efficiency, energy saving features. At the back of carbon rods, there is infrared radiation plate, which can radiate to furnace chamber. Heating body is made of radiation plate and carbon rods, through radiation to transfer energy to furnace chamber, steel suction energy , then transfer magnetic energy to another heating method, during heating, reducing thermal pressure of steel, thermal exhaustion of temperature changing, also reducing thick parcel and carbon-removing because of oxidation for steel.3.Aluminium billet heating furnace with vertical hot shear/horizontal hot shear/hot sawFeatures:a, energy saving type of backward rod pusing type heat shearsb, energy-saving heat recovery devicc.energy -saving industrial combustion machined.Automatic thermal cutting machine2.Die oven/heater,and  nitriding furnace 4.Extrustion dies and toolingsfind die and tooling introduction please. 5.Puller(Single/double type)Features:to insure the press machine to continuously extruding, do not need to consider the non-extrusion time, do not need to stop machine for  profile cutting, hence able to highly improve the production efficiency and finished product rate. In order to meat different tonnage of extrusion line, we developed "Up-Down D