Plastic PFA Ap-210as Has Good Light Transmittance

Basic Info.Model NO.PFACAS No.26655-00-5FormulaC7f14oMaterialPFAUsageGeneral Plastics, Engineering Plastics, Specialty PlasticsColorWhiteTrademarkhaoruTransport PackagePP/PE Woven Bag or Paper Plastic Composite BagSpecification25kg/BagOriginChinaHS Code3917310000Product DescriptionProduct DescriptionFluoropolymer Resin PFA :PFA plastic is a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene. The melting cohesiveness is enhanced, the viscosity of the solution is decreased, and the properties are unchanged compared with PTFE. The resin can be directly processed into products by ordinary thermoplastic molding methods. Suitable FOR MANUFACTURING CORROSION RESISTANT PARTS, WEAR RESISTANT parts, SEALS, INSULATION parts and medical equipment parts, high temperature wire, cable insulation layer, ANTI-corrosion equipment, sealing materials, pump valve BUShing, and chemical containers. Product Parameters Property  Test MethodUnit Typical ValueGENERAL    Melt Flow Rate ISO 12086 ASTM D3307g/10 min 14Melting Point - ASTM D4591 °C (°F) 305 (581)Specific Gravity - ASTM D792 - 2.15Critical Shear Rate, 372 °C (702 °F) - 1/s50MECHANICAL   Tensile Strength ISO 12086 ASTM D3307MPa (psi) 23 °C (73 °F)  25 (3,600)250 °C (482 °F)  12 (1,800)Ultimate ElongationISO 12086 ASTM D3307% 23 °C (73 °F)  300250 °C (482 °F)  480Flexural ModulusISO 178 ASTM D790MPa (psi) 23 °C (73 °F)  590 (85,000)250 °C (482 °F)  55 (8,000)Hardness Durometer ISO 868 ASTM D2240-D55ELECTRICAL   Dielectric Strength, Short Time, 0.25 mm (0.010 in)IEC 243 ASTM D149kV/mm (V/mil)80 (2,000)Dielectric Constant, 1 MHz (106 Hz)IEC 250 ASTM D150-2.03Dissipation Factor, 1 MHz (106 Hz) IEC 250 ASTM D150-