Animal identity
managementBluetooth telescopic card readerLow Frequency
134.2KHzBluetooth low frequency telescopic ear readerExtension bar
reader, low frequency bar reader, bar readerPIT mark of sheep, PIT
mark of giant salamander, PIT mark of fish
exileSpecifications:2.08"OLED displayFDX - B or HDXRead modeThe
length of the scale45-100 - mmReadability range50-80 - mmContinuous
battery operation20 hoursWeight less than 300gFeatures: bluetooth
data transmission45-100 - mm scalableOLED display degree, can work
independentlyInstruction Ear Tag Reader provides basic RFID
reader functions of reading, displaying, and transmitting via
Bluetooth module. This manual is intended to provide a through
overview of the BLE01 Reader and should be carefully read before
starting operating the device. Thank you for your trust in us to
provide for your Ear Tag Reader needs. Features1.Intended Use
Animal Identification and Tracking Management 2.Physical
characteristics Size of reading head:φ50mm Size of length: 45cm to
120cm Weight: ≤0.3kg Screen: 2.08inches 3.Environmental Operating
Temperature Range: -10 to 50 °C Storage Temperature Range:
-20 to 65 °C Humidity Max: 90% 4.Electronic Battery
Capacity:3000mAh continuous working time:20hours Communication
mode: Bluetooth Frequency: 134.2 KHz Reading range: 5-8CM
Waterproof of reading head: IP57 Compatible with the ISO Standards
11784 and 11785, with FDX-B and HDX capability Getting StartedFOR
YOUR PROTECTION, please read these safety instructions
completely before applying power to, or operating the system.
Unpacking The BLE01Ear Tag Reader is carefully packed to prevent
damage during shipment. Before unpacking, please note any visible
damage to the outside of the shipping containers. Items should be
checked in order to ensure that all ordered items have been
received. The following table lists the items which should be
received with each particular system. ITEMSINCLUDEDBLE01Ear
Tag Reader√USB Cable for Charging√BLE01Ear Tag Reader Operators'
Manual√ Each item should be examined for any noticeable defects or
damage that may have occurred during shipment although it is packed
carefully. If any defect or damage exists, please contact to your
local representative immediately to report the problem. Key Board
Functions The handheld keyboard is multifunctional. In different
modes, it has different functions. Power/scan Press the
'Power/Scan' button to power up the reader, the version of the
software will be showed on the screen. Seconds after the reader
turned on, the reader begins to scan. The reader can be turned off
by hold down the 'Power/Scan' button for seconds. You can scan by
pressing the 'Power/Scan' button and quit the scanning operation by
pressing the 'Enter' button. The device will shut down
automatically in 15minutes, if you don't use it. General Setting
Press the 'Set' button to enter the menu setting interface, there
are 4 options you can choose (form 1). Press the 'Enter' button to
choose the option (mark >), press the 'Enter' button to enter.
Press the 'Power/Scan' button to return to the previous menu. Form
1 menu setting OptionDescription1languageThe only choice is
English, now.2BluetoothThere are 3modes,'EMU KEB STD', 'EMU KBD
SMART' and 'BLE PERIPHERAL'. You can press 'Set' button to select a
mode, then press 'Enter' button to choose the mode (the device will
indicate you 'waiting…' for set the parameter), at last there is a
mark'*'before the current mode.3AboutShow the device information,
including the SN and the version of the soft.4Shut downPress the
'Enter' button to power off the device.Notes for Bluetooth: EMU KEB
STD mode: shown the data from the reader and the cursor will jump
to the next line.EMU KEB SMART mode: besides the functions of the
EMU KEB STD, the keyboard will pop automatically for operator to
add information.BLE PERIPHERAL mode: reserved for APP
connectionBluetooth connection You can choose any equipment which
has Bluetooth and Virtual keyboard (like Notes, excel, word etc)
functions as your mobile terminal, like mobile phone, ipad etc.
Open the Bluetooth function of the mobile terminal, and then
connect our device 'Ear Tag Reader'. Open the notes (for example),
create a new or open an existing note, the blinking cursor notice
that the equipment is ready for receiving data from the reader.
ScanningPress the 'Power/Scan' button to detect (see figure4-1).If
there is no tag detected in 20 seconds, the information 'NO Tag'
and' press the Power/Scan button to scan' will be shown
on the screen(see figure 4-2). You can press the 'Power/Scan'
button to detect again.If a tag is detected, the tag number will be
shown on the screen (see figure 4-3).If the Bluetooth connection is
well, the tag number will transmit to the mobile terminal
automatically (see figure 4-4)Our customer Service: 1.Reply you
inquiry in 24Hrs. 2.Feedback of complaint in 24Hrs. 3.OEM/ODM are
welcomed. 4
Related products about RFID Bluetooth Telescopic Ear Tag Handle Reader for Farm
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup