Industrial Pyrolysis Oven Burn-off Oven Powder Coating Remover for Paint Hangers Depitching Heat/Hot Cleaning Furnace

  Burn-off Oven For Removing Paint & Powder Coating  If you have specific parameters and requirements for your own burn-off oven, customization is quite available.   Introduction: The hot cleaning furnace can efficiently and safely wash the chemicals attached to metal parts .Use of polymer is higher than 300 degrees was isolated from the air can be cracking, above 400 degrees in a small amount of air can completely oxidation characteristics, The organic matter on the surface of the hanging device or workpiece to be treated is heated to the decomposition temperature in the first combustion chamber and automatically controlled at this temperature Interval, so that the workpiece surface coating (paint, oil, epoxy polyester, etc.) cracking into organic gas. Organic gas into The second combustion chamber ,it is fully burned in the high temperature environment of the second combustion chamber, and finally produces colorless, non-toxic, odorless gas and exhaust through the chimney. The exhaust gas is strictly tested and certified by authoritative environmental protection testing institutions, and the indicators are up to date National environmental protection emission standards. After the treatment of the hanger or workpiece, as long as gently beat or wash off the surface of the inorganic substance .The machine can be used again. By thermal cleaning to remove surface coating and paint of the hanging work pieces,they are placed in the main decomposition chamber at ambient workpieces temperature from 250 ~ 480 ºC to removal of organic matter on the workpiece. After the process, the surface of work piece is without any organic coating layer residual.. Size:ModelOuter Size     (LXDXH cm)Working Size   (LXDXH cm)Max.Workpiece Size (LXDXH cm)Capacity (m3)ZY-02171x170x181145x145x145130x120x1202ZY-04200x199x210174x174x174160x150x1504ZY-06229x199x239203x174x203190x150x1506ZY-08258x199x239232x174x203210x150x1508ZY-10287x228x239261x203x203240x180x15010ZY-12287x228x268257x198x230240x180x18012ZY-16374x228x268348x203x232330x180x18016Any size can be customized.Photos for checking: Application:1. Remove the thickening coating on the spray hanger and fixture without changing the mechanical properties of the hanger. 2. Completely and completely peel off the unqualified paint or powder coating on the surface of steel parts and aluminum parts without damage to the workpiece. 3. Clear water curtain spray cabinet filter, fan impeller adhesion paint layer. 4. Clean and remove the winding and adhesion of wires, cables, transformers, motors and printing rollers. 5. Clean and remove grease, oil and other organic matter on engine, crankshaft, box body, piston ring and other parts. Technical parameter:  Application:Remove organic matter not limited to epoxy, polyester, mixed powder coatings and paints on workpiece surfaceFuel requirements:Light diesel/natural gas/liquefied petroleum gasControl mode:industrial PLC automatic controlOperating temperature:250° C ~480 ° C adjustable (secondary combustion chamber temperature 500 ° C ~1200 ° C)Furnace wall temperature:≤60ºCChimney wall temperature: