PLA Pbat Modified Material Plastic Shopping Bag Carrier Bag Food Packing and Trash Garbage Bag

Product Description MODIFIED MATERIALSModified MaterialFilm Blowing Grade YPMH-S200Film Blowing Grade PLA Modified MaterialPLA+PBAT+STARCHItem Code: YPMH-S200Recommended applicationShopping vest bag, wrist bag, roll bag, food preservation bag; Electronic product packaging film, householdAppliance packaging film, medical hygiene film, etc.Product characteristics1) Good coloring performance, stable melt strength, and can be directly processed into various films;2) It is usually light white or light yellow, has fragrance, is easy to be decomposed by microorganisms, and has natural antistatic property;3) Good heat stability of raw materials, good recyclability of leftover materials, high temparature and strong shear force;4) This product has low moisture content. It is vacuum packed and can be used after opening.Material properties   ItemTest methodConditions for itemUnitResult[1]Melt flow rate1S0 1133190ºC, 2.16kgg/10min4.0-7.0Density1S0 118323ºCg/cm31.27-1.32Melting point  DSC-ºC110-130[1]The above data are measured values, not guaranteed values.Processing parameters   TemperatureTypical value[2]Reference rangeMelting temperature 120ºC115-125ºCTemperature of film blowing heating areaPosterior segment025ºC120-130ºCMiddle segment130ºC125-135ºCAnterior segment135ºC130-140ºCMould head temperature 135ºC130-140ºCUpper limit of processing temperature   180ºC [2]The above data are typical values and aer only for reference. In the actual processing process, the parameters can be adjusted appropriately.Typical film properties[3]   Characteristics[4]Test methodConditions for testingUnitTypical values[5]Tensile strength longitudinal/transverse1S0 52725ºCMPa21/12Elongation at break longitudinal/transverse1S0 52725ºC%250/600Dart impact  1S0 7765-125ºCg150[3]Typical film are produced by film blowing mechanism with the material YPMH-M300, film thickness is 28 microns;[4]The data are measured by the newly produced film and can not be used as the basis for judging material quality;[5]The above data are typical values, not guaranteed values.Modified MaterialFilm Blowing Grade YPMH-M300Film Blowing Grade PLA Modified MaterialPLA+PBAT+STARCHItem Code: YPMH-M300Recommended applicationsShopping vest bag, wrist bag, roll bag, food preservation bags; packaging film for electronic products, packaging film for home appliances, medical sanitary films, etc.Product Features1) Independent corn tachnology, high product strength, more than 30% higher than the tensile strength of conventional commercial products;2) Good coloring performance, stable melt strength, and can be directly processed into various films;3)It is usually light white, fragrant, easy to be decomposed by microorganisms, and has natural antistatic property;4)The raw materials have good thermostability, good recyclability of leftover materials, and can withstand high temperature and strong shear force.Material properties   ItemTest methodConditions for itemUnitResult[1]Melt flow rate1S0 1133190ºC, 2.16kgg/10min3.0-6.0Density1S0 118323ºCg/cm31.38-1.43Melting point  DSC-ºC110-130[1]The above data are measured values, not guaranteed values.Processing parameters   TemperatureTypical value[2]Reference rangeMelting temperature 125ºC120-130ºCTemperature of film blowing heating areaPosterior segment145ºC140-150ºCMiddle segment145ºC140-150ºCAnterior segment150ºC140-150ºCMould head temperature 150ºC140-150ºCUpper limit of processing temperature   190ºC [2]The above data are typical values and are only for reference. In the actual processing process, the parameters can be adjusted appropriately.Typical film properties[3]   Characteristics[4]Test methodConditions for testingUnitTypical value[5]Tensile strength longitudinal/transverse1S0 52725ºCMPa17/13Elongation at break longitudinal/transverse1S0 52725ºC%300/500Dart impact  1S0 7765-125ºCg190[3]Typical films are produced by film blowing mechanism with the material YPMH-M300, film thickness is 28 microns;[4]The data are measured by the newly produced film and can not be used as the basis for judging material quality;[5]The above data are typical values, not guaranteed values.Product Display Company ProfileWhat we doSolution to replace petroleum plastics with polylactic acid materials and productsPolylactic acid material is 100% biodegradable and environmentally friendly. We have integrated PLA, PBAT and corn starch to produce film products and bag products, providing environmentally product solutions for the food industry and packaging industry.   Our AttitudeHonesty     Integrity      Trust and Dignity01  Operational ExcellenceStriving and achieving the best in all we do ensures we send the best to our partners.02  Relationship BuildingEstablishing mutually beneficial & long term relationships with suppliers, clients and investors with honesty and integrity equates to long-term sustainability.03  Customer SatisfactionEverything we do is customer-centric, fully and efficiently meeting our customers' need is the base of our business, sup