Blind Spot Detection (BSD / BSIS) 77g Microwave Radar for Back Collision Alert

Now this product can install car,truck , VAN and almost of vehicles... BSD(Blind Spot Detection) System: BSD warn the driver against collisions that may occur due to a lane change manoeuvre. BSD are intended to supplement the vehicle's interior and exterior rear-view mirrors. BSD are intended to detect vehicles to the rear and sides of the subject vehicle (see Figure). When the subject vehicle driver indicates the desire to make a lane change, the system evaluates the situation and warns the driver if a lane change is not recommended. The system will not take any automatic action to prevent possible collisions. Responsibility for the safe operation of the vehicle remains with the driver.Features:1. After starting the vehicle, BSD system would start-up.2. The BSD system could be closed or opened through the exterior switch.3. BSD system could receive the information via CAN_BUS(eg. Speed, turn lights,etc.)4.Range :Both side>3m ;Behind >15m5. Motion object distance judgment function;6. Relative speed judgment function;7. Lane change warning function8. LED light will turn on when there is vehicle in blind spot9. LED light will blink and the buzzer will alarm when the turn light is on and there is vehicle in blind spotRadar sensor specradar working frequency76Ghz-77Ghzdetection width3.5m detection distance70mdetection degree 150 degree horizontalrefresh rate 20Hzdetection distance acuracy0.75mdetection distance error'+-1 meterdetection relative speed error +-0.25m/sworking voltage 9-30V working current