Multi-Purpose Polyurethane Sealant for Construction Sheet Metal Roofs Window Perimeters Sealing and Bonding

Description:Surtek 3626 is a one-component, moisture-curable, polyurethane-based, elastic adhesive joint sealant. After curing, it provides a permanently elastic bond to fasten materials with different coefficients of expansion. The sealant is solvent free, environmental friendly.Advantages:1, Good Adhesion to a wide range of substrates. 2, Cures rapidly to a permanently elastic consistency with excellent cut and tear resistance. 3, Solvent free, no odor. 4, Surface paintable with water, oil, and rubber based coatings. 5, Non-corrosive. 6, Provides shock resistance and vibration damping. 7, Exhibits high recovery (> 90%), making it ideal for sealing dynamically moving joints. 8, Weather resistant.Applications:1, Vehicle bodies and cab construction including panels, underbody components, and roofing. 2, Front and rear spoilers, auto trim, moldings, body seams, and welded joints. 3, Waterproofing exterior lap seams in many applications, including truck trailers, RV's, metal roofs, window perimeters, grain bins and HVAC units. 4, Waterproofing rivet seams. 5, Sealing of exposed and concealed joints of aluminum, steel, coated metals, wood, roof rails, and door hinges in transport equipment. 6, Sealing and caulking expansion joints, pre-cast concrete panel joints and joints between logs on log homes.Technical Data Sheet of Surtek 3626:AppearanceUniform PasteColorBlack/White/GreyDensity1.30 ± 0.05 kg/LTack-free time*40~60 minRate of cure*~3.5 mm per 24 hrsShore A hardness40±5Tensile strength≥2 N/mm^2Elongation at break≥500%Shear strength  ≥1 N/ mm^2Glass transition temperature-45°C, approx.Service temperature (continuous) Short - term (up to 48 hrs)-40°C to +90°C 120°CProcess:Cleaning: Clean surface with a strong jet of compressed air, sandblast, or solvent to ensure the surface being clean, dry, free of oil, grease and of sound quality.Activating/Priming: Activators and/or primers may be required to achieve optimal adhesion depending on the nature of substrates.Application of sealant: Cut tip to desired shape and size. Puncture airtight seal. Intsall with hand or power operated gun and extrude the sealant into the joint. Clean excess sealant using hard rubber plate or finger wet with soap solution.Specification:1.310ml cartridge 2.Flexible Package: 400ml, 600ml sausage 3.Drum: 200LStorage and Shelf Life:When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months. The shelf life of polyurethane sealant is related to the temperature and humidity of the environment. The recommended storage temperature is 5-25° C, humidity is