Electric Wheelchair Ramp, Electric Aluminum Ramp Passed EMC Test

1. IntroductionElectric wheelchair ramp can be applied on low-floor city bus and installed underside of passenger door step. When vehicle arrives at stop, the driver control the switch, and then platform can be extended and retracted smoothly. When the platform reach working position, the rear-end of ramp will raise automatically to eliminate height of threshold of passenger door so as to ensure rear-end of platform level up to vehicle floor, convenient for wheelchair to access vehicle.This electric wheelchair ramp has got two patents (Patent NO. ZL 02 2 83133.9 and ZL 2006 20005099.5).2. Technical Parameter 3. Technical FunctionRated Voltage of Motor: DC24VMax. Working Voltage of Motor:DC≤31VMax. Driving Current:10ATime for Retraction or Extend:12~16SMax Loading Capacity: 350 KgMax. Working Height:300-380mmRamp Raising Height of Rear-end (extend fully):55mmWorking Temperature:-20 ~ +50 4. Safety Function: 1  Adopt anti-skid aluminum plate on the surface of platform2  With sound and flashlight alarm during operation of wheelchair ramp3  With danger alarm on the outer-edge of ramp  4 In the course of the ramp extends, if it touches any barrier, the ramp will retract automatically. For a moment, it will extend again. If this status repeats 3 times, then the ramp retracts to the rest position for safety.  The ramp is interlocked with passenger door.  5. Manual Function: When the driving motor is invalid, the ramp can be retracted manually.6 Installation Requirements Unit: mm ModelNet Width of DoorAccessible Width Under VehicleAccessible Height Under VehicleAccessible Depth Under VehicleRemarkEWR-L1101011252001500 EWR-L7101011252001500 /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1