Ytx14-BS Dry Charged Mf Battery/Motorcycle Parts/Motorcycle Battery 12V14ah

Basic Info.Model NO.YTX14-BSAfter-sales Service1 YearWarranty1 YearTypeLead-Acid BatteryRated Capacity14Working Life12 MonthsCertificationCEColorBlackTerminalLead AlloyWeight3.29kgVoltage12VMaterialABSCell6Maintenance TypeFreeRechargeableChargeableTrademarkTYLTransport PackagePaper BoxSpecification149*87*146OriginGuangzhou, ChinaHS Code8507100000Product DescriptionProduct Description  Battery Series SpecificationDRY CHARGED MF BATTERYBattery Type VoltageVCapacityAh(10HR)Dimensions-Millimeters(±2mm)ApproxWeightKgLWH6N6-BS12699571090.66±0.03YTX2.5L-BS122.580711050.93±0.03YTX3L-BS12398571090.89±0.03YT4B-BS12411238840.79±0.03YTX4L-BS12411269851.17±0.03YTZ5-BS12411269851.17±0.03YTX5L-BS125112691061.38±0.0312N5-BS125119611271.47±0.03YTX7L-BS127112701271.75±0.03YTX7D-BS127147591291.8±0.0312N6.5-BS126.513866981.59±0.03YTX7E-BS127135761221.9±0.04YTX7A-BS12714987931.86±0.03TYX9-BS129149871042.15±0.0412N9-BS1210135751372.40±0.04YTX12-BS1212149871292.67±0.04YTX14-BS1214149871463.29±0.04YTX14AH-BS1213134891663.01±0.04YTX20L-BS1220174871524.1±0.05YT7B-BS12714966941.68±0.03YT9B-BS129150701051.94±0.04YT12B-BS1212150701302.31±0.04YTX24L-BS1224205871625.16±0.06YIX30L-BS12301661261756.05±0.06 Company ProfileFactory IntroductionFounded in 1999, Guangdong Tongli Power Group is a comprehensive high-tech enterprise integrating R&D, manufacturing and sales.It mainly produces automobile batteries, motorcycle batteries, electric vehicle batteries, energy storage batteries and solar power generation systems. One of the leading lead-acid battery manufacturers.We have advanced equipments for producing and testing, high-quality technical management team, from alloys, plates, battery tanks to finished batteries one-stop manufacturing, battery quality is reliable, cost-effective, the products sell well all over the world, and are well received by customers. In 2018, it waslisted in CCTV "Ingenuity" and was rated as the most ingenious enterprise. Packaging & Shipping NoticeDANGER OF EXPLODING BATTERIESBatteries contain sulfuric acid and produce explosive mixtures of hydrogen and oxygen.Because self-discharge action generates hydrogen gas even when the battery is not in operation,make sure batteries are stored and worked on i a well-ventilated area.Always wear safety glasses and a face shield when working on or near batteries. When work- ing with batteries:* Always wear proper eye, face, and hand protection. * Keep all sparks, flames, and cigarettes away from the battery. * Do not remove or damage vent caps. * Make sure work area is well ventilated.* Never lean over battery while boosting, testing, or charging.SAFE BATTERY INSTALLATIONTo assure safe installation and proper operation,follow these installation procedures:* Disconnect ground cable first (this is usually he negative cable;however, older vehicles may have a positive ground).* Remove battery - note position of positive(+) and negative(-)terminals.Mark the cables for correct connection to replacement battery.* Clean terminals and cable connections with a wire brush.Broken connections and frayed or cut cables should be replaced.* Install the replacement battery in the same position as the old one. Secure battery with the holddown assembly.* Make sure the terminals do not touch any metal mounting, engine, or body parts. * Connect cables tightly. Connect ground cable last to avoid sparks.SAFE CHARGINGBefore beginning the charging operation, read the instructions that come with the charger. Never attempt to charge a battery without first reviewing the instructions for the charger being used. In addition to the charger manufacturer's instructions, these general precautions should be followed:* Always charge batteries in a well-ventilated area and wear proper eye protection.* Turn the charger and timer "OFF"before connecting the leads to the battery to avoid dangerous sparks. Never try to charge a visibly damaged or frozen battery.* Connect the charger leads to the battery; red positive (+) lead to the positive(+) terminal and black negative (-) lead to the negative (-) terminal. If the battery is still in the vehicle, connect the negative lead to the engine block to serve as a ground. (If the vehicle is positive grounded, connect the positive lead to the engine block.) * Make sure that the leads to the connections are tight.* Set the timer, turn the charger on, and slowly increase the charging rate until the desired ampere value is reached..* If the battery becomes hot or if violent gassing or spewing of electrolyte occurs, reduce the charging rate or temporarily discontinue the charge.* Always turn the charger "OFF"before removing charger leads from the battery to avoid dangerous sparks.After Sales ServiceSERVICE CONTENTPre-sale servicesproduct consultation, product selection, project/product design, etc.In-sale servicesbattery installation, supervised installation, capacity testing, technical training, etc.After-sales serviceproduct acceptance, complaint response, technical support,