Wheel Alignment Scissor Lift Table U-Y35D Tubular Structure Wheel
Alignment Scissor Lift With Built In Lifting PlatformsProduct Code:
U-Y35D Wheel Alignment Scissor Lift TableSafety
Features:1. Precision machined double sided safety teeth design2.
Safety descending stop & alarm3. Safety valve for anti-explosion of
hydraulic system4. Height limit switch(Jack)5. Height limit
switch(Main Platform)Scissor LiftProductTubular Structure Wheel
Alignment Scissor Lift With Built-In Lifting PlatformsProduct
CodeU-Y35DCapacity3.5 TLifting height1850 mm (73")Min height330 mm
(13")Power supply220V 1PH 50/60Hz 2.2KW 220/380V 3PH 50/60Hz
2.2KWReleasePneumatic Lock Release 1.The existing tyre
changer motor is 220V, how to operate if we want to replace it with
380V motor?ANSWER:We need to replace the 220V motor with 380V
motor, also the power cord(line) needs to be replaced. The
connection of the switch needs to be adjusted, then the connection
can be made according to the correct connection method.2.Why
appears the phenomenon that the bead breaker blade presses tyre
weakly?ANSWER: Firstly, check whether the working pressure of the
machine reaches 8-10bar. If it doesn't reach enough pressure
numerical value, the bead breaker blade will press tyre weakly. If
the pressure is sufficient, check if there is air leakage in the
bead breaker cylinder.3.What about the noise when the machine is
running?ANSWER: Firstly, we need to find out where the noise comes
from. Generally, there will be motor noise and gear box noise.
Then, check it if there is still noise when running the motor
without belt, it is the noise of the motor itself. Otherwise, it is
the gear box noise.4.How to adjust it when appear the phenomenon
that the demounting head scratches the rim during we are removing
the tyre.ANSWER: Firstly, we should adjust the angle of the
demounting head to align the middle line of the demounting tail
with the rim edge. If the angle of the demounting head is
appropriate, observe whether there is a large shape variable on the
column or hex bar when the tyre is under pressure. If there is, we
should replace the corresponding parts.5.What's kind of oil in the
oil cup of water distributor?ANSWER: They are # 20 machine oil, air
gun oil, sewing machine oil, transformer oil, etc.6.How to adjust
the working pressure of the machine?ANSWER: Lift the button of the
pressure regulating valve on the air regulator assembly up, then
turn clockwise to increase the pressure or turn counterclockwise to
decrease the pressure, and press the knob down to lock after
adjusting to the standard operating pressure.7.If the pedal cannot
return to its position after stepping the pedal, why(what's the
reason)?ANSWER: Generally, there will be something wrong in the
return spring or spring plate on the pedal assembly. We can
disassemble the pedal front face to see if there is any damage in
the accessory and replace it to solve the problem.8.Is it feasible
if we want to operate 24 inch tires with the existing 885A series
machine?ANSWER: It is recommended to upgrade to a 22-inch inner
adjustable round turntable with three position adjustable and a
clamping range of 9-26 inches.9.Are there measures to protect the
rim from being scratched by clamping claws?ANSWER: The jaw
protector cover can be installed on the jaw to protect the
rim.10.The bead breaker blade pressing tyres will scratch the rim,
is there a good protection method?ANSWER: We can install the
protective cover on the bead breaker blade to effectively protect
the rim from scratches when pressing tyres.11.Is there any change
in the size of the tyre remover after the tyre changer is equipped
with motorcycle adapter?ANSWER: If the tyre changer is equipped
with motorcycle adapter, it can reduce 2 inches or increase 3
inches on the basis of the normal external clamping range. For
example, the normal external clamping range is 10-20 inches, if the
tyre changer is equipped with motorcycle adapter, the clamping
range is 8-23 inches.12.How to connect the motor when replacing the
220V motor?ANSWER: Power lines connect with1,3; Motor lines: Z1
connects with 7, Z2 connects with 11, U1connects with 8, U2connects
with213.How to connect the motor when replacing the 380V
motor?ANSWER: Power lines connect with 1,5,9;Motor lines connect
with 2,6,8.14.If we want to improve the operating speed, is it
feasible to replace the motor with a double-speed motor?ANSWER: The
plan is feasible. However, some models are limited by the size of
the box and cannot replace the double-speed motor.15.The tyre is
not clamped tightly on the turntable and skidded when it is
demounting and loaded.ANSWER: Firstly, check the appearance of the
clamping claw. If the tip on the back of the clamping claw is badly
worn, the tyre will not be hold up tightly. In addition, small
cylinder channeling or air leakage will also cause support
clamping./* January 22, 2024 19:08:37 */!function(){function
s(e,r){var
a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(
Related products about Wheel Alignment Lift Table U-Y35D Tubular Structure Wheel Alignment Scissor Lift with Built in Lifting Platforms
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup