Cr-C Common Rail Injector Tester +S60h Nozzle Tester Injector Diagnosticer Solenoid Injector

CR-C common rail injector testerWith German PWM control chip can accurately simulate the driving signal of the ECU to the various operating conditions of theinjector, such as the operating point of the discharge point and the full load point. Can drive multiple brands of injectors, suchas common rail injectors such as Bosch, DENSO, Delphi.Test range: atomization effect, discharge point, full load point Power supply: 110-240V Working temperature: -30 ºC -70 ºCDimensions: 110 * 250 * 190mm Adjustable pulse width: 10MS Adjustable frequency: 30HZCommon rail diesel nozzle Injector tester S60HDiesel Injector Nozzle Pop Tester fuel injector nozzle tester with 0 - 400 BAR / 0 - 6000 PSI Dual Scale Gauge  injector checker is suitable for all common rail injector and mechanical injectors, auxiliary products have compression release valve, it can check the fuel injection conditions of various types of injector quickly and easily. It also can be used with common rail injector 118 solenoid valve tester to test various types of common rail injectors. The injector checker equipped with two different types of tubing. You can freely switch suitable for detecting the injector, it is a good choice to Initial inspection injector working state.Instruction:As we know driver common rail injector,not only need a tester but also need hight pressure fuel,so we used a manul fuel pressure pump S60H as shown below:1, the high pressure oil common rail injector directly or into the holder is connected to the common hand pressure calibrator.2, according to the corresponding plug injector brand choice, will harness and injector connected up correctly.3, according to the fuel injector brand, drive mode selecting corresponding, at this time can hear the injector solenoid valve suction armature "Pa, Pa" voice.4, by constantly under pressure calibrator lever, provide the suitable injection pressure, the general pressure value takes 30-40MPA best, at this time can be observed on the fuel injector atomization performance.5, through the external cylinder, can be detected on the injector fuel injection quantity and oil return.Company ProfileNanyang NanTai Experimental Equipment Co.,Ltd is a joint-stock enterprise that produces common rail test bench, traditional diesel fuel injection pump test bench, Nozzle Tester, and sells spares parts for repairing variety of electronic diesel injection systems to serve the automobile aftermarket all over the world. The company pursues high standard manufacturing and qualified products. All the products have passed the quality system certification of ISO9001:2008 & CE certificate and entered European market. Depending on the stable and lasting capabilities, our products are well known to international market such as Russia, Mongolia, Bulgaria ,Albania, Argentina, South Africa, Germany, Romania, Ukraine, Haiti, Iraq, Britain, Brazil, Malaysia and etcCertificationsPackaging & ShippingFAQQ: Are you trading company or manufacturer ?A: We are test bench assembling factory. We have had test bench for 20 years.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according toquantity.Q: What is your terms of payment ?A: Payment=1000USD, 30% T/T in advance ,balance before shippment.Q: How about the use of maintenance technology and equipment ?A:We have free training about test bench,injector and pump maintenance.Q: Why should I choose your product?A: We can provide you the best quality and the most competitive price ,and we have our own engineer, if you have any requirementsyou can contact us directly.   /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1