Ultrasonic Coating Systems for Fuel Cell Catalyst Coatings

Ultrasonic Coating Systems for Fuel Cell Catalyst Coatings ItemParameterFrequency50KhzPower10~100wFLOW RATE (ml/min)0~20ml/minSpray width2~200mmSolution utilizationabove 98%Ultrasonic spraying has become an industry standard for wave soldering flux coating, which can replace traditional air spraying and foam coating methods, providing a high precision, high performance, low VOCs emission flux coating solution. Dongfang Jinrong provides a complete solution of ultrasonic atomization spraying of flux including ultrasonic nozzle, ultrasonic control, metering liquid supply, etc., which can be used for large-area frontal coating and selective spraying in special areas, and can be convenient and fast. for direct insertion into existing wave soldering systems. Ultrasonic spraying is compatible with all types of flux, reducing flux waste by 80%, covering evenly and fully, and maintaining low maintenance costs. The gathered ultrasonic nozzle is an ultrasonic atomizing nozzle with a small spray width. It adopts ultrasonic atomizing nozzle technology, and the special constricted flow channel design uniformly gathers and distributes the carrier gas, so that the liquid mist after ultrasonic atomization is ejected in a focused form, thereby reducing the spraying area of the ultrasonic nozzle. Due to the small spray width of the convergent ultrasonic nozzle, it is mainly suitable for various small and medium-sized spraying applications. Complementary with the Oriental Jinrong wide spray ultrasonic nozzle, it can almost meet the requirements of all different plane spraying.        The typical application is fuel cell spraying, that is, the membrane electrode spraying in the proton exchange membrane fuel cell. The catalyst (such as platinum-carbon catalyst) dispersion is ultrasonically atomized and sprayed onto the proton exchange membrane to form a uniform and dense membrane electrode. Because the gathered ultrasonic spray nozzle has the advantage of concentrated spraying and can be precisely sprayed in a small area, the gathered ultrasonic atomizing nozzle can also be applied to the surface spraying of interventional medical devices such as drug balloon spraying and drug stent spraying. Dissolve drugs such as rapamycin, paclitaxel, etc. in an organic solvent to prepare a drug solution, and spray the balloon or stent evenly after ultrasonic atomization by a convergent ultrasonic nozzle to form a uniform and dense drug on the surface of the balloon catheter and stent coating. In addition, the gathered ultrasonic nozzle can also be applied to such as thin film solar cell spraying, perovskite solar cell spraying, PCB flux spraying and so on.Spraying in the field of new energy: fuel cells, thin-film solar cellsSpraying in the glass field: anti-reflection AR, hydrophilic and hydrophobic coating, conductive layer, etc.Spraying in the electronic field: flux, photoresist, conformal paintNon-woven fabric and textile sprayingSpraying in the biomedical fieldConductive film: conductive films such as carbon nanotubes, graphene, nano silver, etc./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1