Stainless Steel Flexible Hose Pipes with Fixed or Swivel Flange Ends

Stainless steel flexible hose pipes with fixed or swivel flange ends   What is flexible metal hose?- Corrugated hoses are absolutely leak-tight and are used to convey liquids or gases under pressure or as vacuum lines. They are also referred to as pressure hoses. Their special design achieves both flexibility and pressure resistance.Where can you use a flexible hose? - Types, Benefits and UsesFlexible hoses are used for transferring fluids including liquids like chemicals, oils,and water, and gases fluids like gases, steam and air. They function for absorptionof thermal expansion, centering and vibration of piping, and for reciprocation ofpiping systemsWhat are advantages of flexible hoses? - The benefits of flexible hose over rigid pipe and tubing is that flexible hose is simple to route, withstands vibration and thermal expansion or contraction     Product nameStainless Steel Single Braid Flexible Metal Hose/Pipe with FittingMaterialStainless Steel 304, 321, 316 and 316LDN6-300mmHose TypeAnnular corrugatedApplicationWater, gas, industrial, steam, chemicalBraided MeshSingle / Double layerConnect TypeFlange/Thread/Quick couplingConnector approvalLoose or fixed flangeBraided mesh layersingle or double layer braiding  ------Technical Data   Construction of Flexible Metal HoseInner Core: Corrugated Stainless Steel •Flexible metal hose stainless steel core strengths are available in 304, 321 and 316L stainless steel •Stainless steel tubing formed into corrugations parallel to one another •Helical / Convoluted option available upon requestOuter Core: Braided Stainless Steel Layers • Purchase corrugated core hose with no layers, single or double braided •Flexible metal hose outer braid layers made from 304 stainless steel •See braid layer code key at the bottom of this tableBenefits of Flexible Metal Hose •All metal hose - corrugated stainless steel core, sold standalone or with braided steel layers •Pressure tolerances include full vacuum to those listed in the spec table below •Application Temperature ratings from Cryogenic to 1500° F •Meets or exceeds ISO 10380 at the maximum working pressureBraids Metal wire braid on a hose assembly provides the hose assembly a higher pressure capability by acting as a restraint against hose elongation and acts to dampen vibration. The second layer of braid may be used to increase pressure ratings provided the test pressure is not exceeded.Applications: This hose is suitable for conveying all types of liquid and gases with extremely low and high-temperature requirements. Corrugated Stainless Steel Braided Pressure Hose, to ISO 10380 specification.Standard Flexility hosesDNCorrugated hosesBraidSingle BraidDouble BraidIDODPitch DistanceThicknessNo. of   CarrierNo. of wires in carrierWire   Dia.Dia of Hose with Single Layer of   braidingWorking Press.Test Press.Working Press.Test Press.I. D. (mm)Devi. (mm)O. D. (mm)Devi. (mm)I(mm)Devi. (mm)S(mm)NCNWWD(mm)OD(mm)BarBarBarBar88± 0.1012.3± 0.102.9± 0.2± 0.020.23640.314.5801201402101010± 0.1014.6± 0.102.8± 0.010.23650.315.8901351402001212± 0.1018± 0.102.8± 0.020.23660.319.2801251201801514.4± 0.1021.5± 0.103.5± 10.33660.322.1801251201802020± 0.1027± 0.104.5± 10.283690.329.26090801002525± 0.1032.5± 0.105± 10.2836100.333.76090801003232± 0.1040± 0.105± 10.2836110.341.2508070904040± 0.1050± 0.106± 10.2836110.351.2508070905050± 0.1063± 0.106± 10.348120.464.6407060806565± 0.1081± 0.107± 10.46410.482.6407060808080± 0.1098± 0.1010± 10.464150.499.630605070100100± 0.10120± 0.1011.5± 10.496120.4121.616303050125125± 0.10150± 0.1013± 10.596120.5151.616303050150150± 0.10180± 0.1014± 10.596140.5181.616303050200200± 0.10230± 0.1017± 10.6120160.523216303050250250± 0.10280± 0.1027± 10.8140180.528210202040300300± 0.10340± 0.1028± 10.8144180.53428161630   ------Various connectorVarious connectors can be welded or clamped onto the metal hose for different applications------Detail displayUniform braiding without pin hole, to ensure the anti-explosion performanceMovable flange joint, to connect with the pipe system perfectlyBright welding joint to ensure the hose quality   ------Hose TestingBefore deliver the goods, we will test the hose by leakage testing and hydro testing to ensure the hose complies to its requirement.   ------Standard seaworthy packageWe adopt standard seaworthy package for all export orders.Flexible metal hose container package   ------Manufacutring facilities   A: Tube welding machine (DN12-300)   B: Hydraulic forming metal hose making machine - U type hose (DN32-300)   C: Mechanical hose making machine - U type hose (DN6-40)   D: Elastomer (PU)  hose making machine - Omega type hose (12-100)E: Wire braiding machine (24 carriers - 156 carriers)  ------WHO WE AREComflex Industrial Co.,Ltd   We make all kinds of flex-related products, such as flexible metal hoses, expansion joints, braidings, hose fittings, and related machines, such as elastomer hose forming machine, hydraulic forming machine, wire braiding machine, rewinding machine,