It-Prb-7000-D1 Cheap Paint Automatic Sprying Car Spray Booth Price

 Auto Spray Booth/Auto Paint Booth/Car Spray Booths For Car Painting1.FEATURESSolution: 4 Prep stations (7x4x2.8m) & 1 Paint booth (7x4x2.8m)The solution comes with 1 paint booth and 4 prep stations.3 of the 4 prep stations come with rear semi downdraft airflow, with exhaust plenum chambers at the rear. And 1 prep station is with full downdraft airflow, with grids and basement in the ground for extraction.All 4 prep stations are with intake and exhaust fans.The 3 rear semi downdraft prep stations are mainly used for prepping work, while the downdraft prep station with infrared lamp is used for spraying and baking primer before surface finishing.After the completion of work at each bay, the car can be conveyed directly from one bay to the next through floor tracks and trolleys where the car is loaded, greatly improving the workflow and efficiency.We can also customize the solution according to your personalized needs and requirements.2.DESIGN3.SPECIFICATIONSITEMSSPECIFICATIONSModelIT-SUPER-701 Car Spray Painting BoothDesign standardBS EN 13355: 2004+A1:2009BS EN 60204: 2006+A1:2009Internal dimensions 7000 X 4000 X 2800mm (L X W X H)External dimensions8570 X 4110 X 3460mm (L X W X H)AirflowFull DowndraftPlenum (height)600mmExtraction350mm basement sunken in the groundExtraction area28m2Grids carrying capacity900kg/wheelEntrance door3400x2700mm (WxH), manual entry door, 1 setDivider door6000x2400mm (WxH), electric plate roll-up door, 1 setService door800x2000mm(WxH), 1 setWalls50mm rock wool wallsCeiling lights (LED)8 sets, each 6 X 18W, 864W totalSidewall lights (LED)4 sets, each 2 X 18W, 144W totalBrightness>1,000LUXFiltersBag filter, high efficiency ceiling filter, floor filter, exhaust filterIntake/Exhaust unitDirect-type turbine fan, 2x7.5KW, SIEMENS motorAir volume28,000m3/hEmpty loaded air speed0.28m/sHeats 232kw heat exchanger, RIELLO gas burner RS5DMaximum working temperature 80ºCControlsCE standard control boxInverter SCHNEIDER inverter controlStack light Yes.Heat recuperator OptionRated power20KW   ITEMSAuto Spray Booth/Auto Paint Booth/Car Spray Booths SPECIFICATIONSProductCar Prep StationDesign standardBS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009ModelIT-PRB-7000-D (downdraft)IT-PRB-7000-RS (rear semi downdraft)Internal dimensions7000×4000×2800mm (L×W×H)External dimensions8200×4160×3460mm (L×W×H)AirflowFull DowndraftRear semi downdraftPlenum (height)600mmExtraction350mm basement sunken in the groundRear exhaust plenum chambersExtraction area28m23.2 m2Grids carrying capacity900kg/wheel/Rear wall/Ceiling panelsSingle layer galvanized steel, powder coatedFront door3800x2600mm, 1 set, electric soft curtain doorDivider door6000x2400mm, 1 set, electric soft curtain doorCeiling lighting8 sets, each 4 X 18W, 576W totalBrightness> 800LuxIntak and exhaust system2×5.5KW, 970RPM, 380V, 50HZ, SIEMENS motorAir volume18,000m3/h, 650paFiltersPre-filter, high efficiency ceiling filter, fiberglass filter, exhaust filterControlsFan start, emergency stop switch, lighting, failure indicationElectrical & Tool cabinetsYes. Integrated in the rear wall.Overhead infrared heating systemYes. 6*1KWSpecial itemRated power: 15KW4.DETAILSBOOTH STRUCTURE (SPRAY BOOTH)350mm high metal base sunken in the groundWall panels vertically installed600mm plenumOPTIONWe can customize the basement to specially meet your workshop requirements.4-LEAF ENTRY DOOR & ELECTRIC DIVIDER DOOR (SPRAY BOOTH)Entry door with big safety glass windows and panic latchLED lamps, IP55 protection grade lighting fixturesAIR MAKEUP UNIT (SPRAY BOOTH)2*7.5kw fan unit, SIEMENS motor28,000m3/h air volume, 0.28m/s empty loaded air speedDamper (for painting and baking phase)232kw heat exchanger, RIELLO RS5D gas burnerHEAT RECUPERATORWorking principleThe device is an additional device for spray booths used in cold areas, which is for recycling waste heat.The temperature of the exhaust gases from heating painting is higher than that of outdoor fresh air. Fresh air drawn in by the intake fan is 0ºC or below 0ºC. In cold areas where the temperature is below 0ºC, the heating system needs to work more frequently, which results in more energy consumption. However, when using heat of the waste gases to heat the fresh air, it does not require additional energy, which greatly saves energy and improves the energy efficiency. It is an excellent green and environmental heating device.   ItemsParameters detected at the lower temperature endParameters detected at the higher temperature endAirflow28,000m3/h28,000m3/hAir inlet temperature-5ºC23ºCAir inlet humidity5010Air outlet temperature9.4ºC7.1ºCAir outlet humidity1728Pressure loss511Pa436PaTemperature efficiency51%57%Internal air speed8.07m/s8.07m/sCondensate water volume0kg/hExchange energy148,380wCAR PREP STATION- 600mm plenum- Flat ceiling lighting fixtures- Intake and exhaust fan unit, 2*5.5kw- Extraction Option A: extraction through exhaust plenum chambers at the back Option B: extraction through base with grids