Diesel or Gas Heated Automotive Car Spray Booth Paint Booth

Product details:**Model:YS-10 **Inside dimention: 6900*3900*2650mm (L*W*H) **It fits for atuobody auto car spraying and painting,which indicates also suitable for truck shop and end-user. **Custom paint booth is the key point for YOKSTAR,professional technical team and passionate sales are always ready for you. **CE certificate approval.A. During painting, spray booth can offer a sealed environment with cleanness, safety and excellent lighting for the painting operation of all kind of components and different products. B. During baking, drying time, temperature and humidity in spray booth can be set according to different paint materials to achieve a perfect high-quality spraying and baking for your cars. C. Spray booth makes spraying and baking operation with no limits of all kinds of whether, thus ensuring physical fitness of operators and absolute safety of equipments.**General Description   Spray booth comes out as it is seasoned with spraying for whole surface of modern automobiles, part repair and baking which can provide operation room of cleanness, sanitation for above tasks. The whole set equipment has the function of ventilation, air purge, drying, disposing exhaust gas and so on which meets basic requests of auto surface disposal. The equipment is made up of room body, lighting unit, intake and exhaust air system, heating system, air purge system, exhaust gas disposal system and control system.The air flow: Fresh air →pre-filter →intake air fan→ heating generator →plenum →ceiling filter →working area of the spray booth →the first exhaust air filter →the second exhaust air filter →exhaust air fan →exhaust air duct →atmosphere See the normal spraying principle figure for details:** Maintenance rules   Spray booth is a kind of special equipment which includes machinery, electrical parts, filter materials, airproof parts and many other parts. So in the daily using please pay more attention of the repair and maintenance. There are several aspects as below:     1, Maintenance of filter systemThe filter system is an important part of spray booth, usually it includes prep-filter, ceiling filter and fiberglass filter. Prep-filter is a used for filtering fresh air, normally it should be replaced after 100 working hours.Ceiling filter is used for second-filter of air, normally it should be replaced every 400 working hours. Fibreglass filter is used to collect solvent fumes of exhaust air. There're 2 fiberglass filter of the booth. Generally it should be replaced every 80-120 working hours.   2, Maintenance of airproof parts In order to make sure the airproof capacity of the booth, airproof parts are needed a lot. As the air produced by working booth is caustic, and airproof parts are often made of rubber materials which are easily suffered, so timely renewing the airproof parts are indeed to ensure a high quality.    3,Maintenance of electrical parts As "brain" of the booth, control system directly conducts all kinds of operation for the booth. So it is extremely important to keep a good stableness of all electrical parts. During operating time, periodic checking of all electric parts is recommended in order to ensure correct and precise operation.     4,Maintenance of gearing partsGearing parts are mainly composed of straps between motors and fans. As they're used frequently, straps would become loose and worn after a period of enlistment. So adjust the belts according to working condition and replace them if necessary, so the working effect of fans can reach the best. Furthermore, there are oil-holes at the two ends of the axletrees of fans, periodically lubricate the above oil-holes to keep a smoothly running.     5,Maintenance of other partsSo as to ensure the performance of spray booth, daily maintenances of other parts are also needed. It mainly includes cleaning the booth, checking tight-and-loose of connections, checking the working environments outside and so on, all which have been done well to prevent from unseen accidents.   NOTICE: The maintenance work should be done by the person specially assigned for a job,and the following should be done in the maintenance process:a. Any sundries can NOT be put in the booth.b. Close the power supply of the booth, and set warning sign at the main power supply.c. All the replaced filters should be disposed in a special way, they can not be disposed as the normal garbage.**Spray Booth Conveying and Storage   As spray booths are in big size, they're conveyed in bulk while loading and unloading. The parts in frame should be loaded and unloaded by fork vehicles while the small parts are conveyed by manpower. Be noticed to make sure that the parts are not damaged and dilapidated in the loading and unloading process.The finished parts of spray booth are usually stored in the finished products warehouse, and marked on the outside packages for checking before delivery. After being sent to the destination, all the parts should not be put in the open air but in store h